The disassembly fixture lets you disassemble the module.

A. Make sure that the parts or surface layer are dry and free from uncontamination.

B. Make sure that the parts or surface layer are dry and free from contamination.

C. Make sure that the parts or surface lamination are dry and free from contamination.

A. When the movement of input rod is ranged from 5 to 10 mm, measure the piston retraction.

B. When the input lever is between 5 and 10 mm, measure the piston extension.

C. When the interval of input shaft changes between 5 and 10 mm, measure the expansion of the piston.

A. 仅在真正需要时才会使用被动时态。

B. 当真正需要时仅使用被动时态。

C. 当真正需要时仅使用主动时态。

A. When simulating altitude, make sure you have alternate ATC transponders in active mode.

B. Make sure that the ATC transponders are in standby mode when you simulate altitude.

C. It is optional to keep the ATC transponders in ready mode during altitude simulation.

A. Write instructions in the infinite form.

B. Write instructions in the command form.

C. Write instructions in the appropriate form.

A. The forward movement of the control lever must be slow and continuous.

B. The control lever must be kept moving forward slowly and abruptly.

C. You must continuously slow down the forward movement of the control lever .

A. This software is only acceptable by the assigned handling system.

B. This software is compatible only with the specified operating system.

C. This software only corresponds to its designed operating system.

A. If the rush air turbine has been extracted.

B. If the Ram Air Turbine (RAT) is retracted.

C. If the pushed air turbin has been extended.

A. 将车辆拉至规定的安全区域。

B. 将车辆拉至特定的、可以使用程序的区域。

C. 将车辆拉至可以使用标准程序的安全区域。

A. Use a hole instrument to examine the turbine internally.

B. Use a borescope to examine the combustor internally.

C. Use a hole instrument to examine the combustor externally.