If an engine fire detection system is available, describe, give principle of opreation, and explain how to use it.

A. 《持续适航维修大纲》检查文件编号中系统代号的两位数字应使用GAMA第2号规范的编号体系。

B. 在《持续适航维修大纲》检查文件编号中，代表章号的两位数字应遵循GAMA 第2号规范的编号体系。

C. 《持续适航维修大纲》检查文件编号中的两个数字应由GAMA第2号规范中的编号系统决定。

A. As the depressurization of the alternate system, the hydraulic system A must be released to open the rudder hydraulic system selector valve and permit hydraulic fluid to flow to the rudder actuator below.

B. In order to depressurize standby system, the hydraulic system A must be depressurized to open the rudder hydraulic system selector valve and let hydraulic fluid flow to the lower rudder actuator.

C. Due to the depressurization of the alternate system, the hydraulic system A must be released to open the rudder hydraulic system selector valve and permit hydraulic fluid to flow to the bottom rudder actuator.

A. The maximum continuous power listed in the Airplane Type Data Sheet is used to show compliance with the applicable airworthiness standards and is the value shown in the Pilot＇s Operating Handbook.

B. The maximum continuous power listed in the Airplane Type certificate is often used to show compliance with the applicable airworthiness standards and is the value shown in the Pilot＇s Operating Handbook.

C. The maximum continuous power listed in the Airplane Type Data Sheet is used to show compliance with the applicable airworthiness regulations and is beyond the value shown in the Pilot＇s Operating Handbook.

A. If one or more blades are broken, make an entry in the engine logbook.

B. If one or more blades are in place , make an entry in the engine logbook.

C. If one or more blades are absent, make an entry in the engine logbook.

A. 如果在测试过程中选择中断，测试会停止并在CDU上显示测试中断页面。

B. 如果在测试时选择暂停，测试会停止并且CDU上显示测试暂停页。

C. 如果在测试时选择暂停，CDU测试将中断并且显示测试暂停页。

A. The aim of STE is that readers all over the world can easily understand the technical texts and that writers who are responsible for preparing technical texts know how to prepare them in a easy method.

B. The objective of STE is to provide writers with general principles on how to prepare technical documents in a clear, simple and distinct manner that readers all over the world can easily understand.

C. The function of STE is to describe how to prepare technical texts in a easy, clear and specific way and to allow readers all over the world to understand difficultly.

A. 拆下接合表面漆层周围的转接板。

B. 去除转接板接合面周围的底漆涂层。

C. 拆卸转接板来去除接合面周围的面漆。

A. 可以通过使用抹布沿钢索擦拭的方法，实现对钢索关键疲劳区域的仔细检查。

B. 可以通过沿电缆缠绕碎布的方式来对电缆关键疲劳区域进行仔细检查。

C. 在钢索严重疲劳区域进行近距离检查，可沿钢索用棉布清洁。

A. 检查并拆下损坏的零件。

B. 检查拆下的零件是否损坏。

C. 检查损坏的零件，判断是否要拆下。

A. It is not permit to work with any uncontrolled technical document for maintenance work.

B. It is not permitted to work with any uncontrolled technical document for maintenance work.

C. It is not allowed to work with any unreliable technical document for maintenance work.