A、 确保夹钳的位置与您在拆卸过程中记录的位置一致。
B、 确保夹钳的位置与您在拆卸过程中的位置齐平。
C、 确保夹钳的方向与您在拆卸过程中的方向一致。
答案:A
A、 确保夹钳的位置与您在拆卸过程中记录的位置一致。
B、 确保夹钳的位置与您在拆卸过程中的位置齐平。
C、 确保夹钳的方向与您在拆卸过程中的方向一致。
答案:A
A. The cover title shall be "Pilot's Operating Handbook" or "Pilot's Operating Handbook and FAA Approved Airplane Flight Manual".
B. The topic cover shall be "Pilot's Controlling Manual" or "Pilot's Controlling Manual and FAA Accepted Airplane Flight Manual".
C. The page topic shall be "Pilot's Managing Handbook" or "Pilot's Managing Handbook and FAA Authorized Airplane Flight Manual".
A. Horsepower Radius and Engine Revolving Speed
B. Horsepower Ratings and Propeller Rotational Speed
C. Horsepower Values and Propeller Turning Speed
A. 如果由于腐蚀你不能拆卸螺栓,则用油浸泡。
B. 如果你不能去除螺栓的腐蚀,则用油浸泡。
C. 如果由于腐蚀不能拆卸螺钉,你可以涂渗透油。
A. If the error is more than 3 degrees, calibrate the glide slope.
B. If the error is more than 3 degrees, calibrate the compass.
C. If the error is more than 3 degrees, calibrate the gyroscope.
A. 如果没有任何支架损坏,则继续执行此程序。
B. 如果任意支架损坏,则继续执行此程序。
C. 如果没有任何跳开关损坏,则继续执行此程序。
A. 拆下活门旁边的泵。
B. 拆下位于泵上的活门。
C. 拆下泵旁边的活门。
A. 向前旋转手柄。
B. 向后移动水平面。
C. 向后移动手柄。
A. 在词典中给出的形容词都是原形,如果有比较级和最高级,以括号标示出。
B. 词典中每个被认可的形容词都列入基本表格,如适用,将其比较和最高级形式放在一起。
C. 词典中每个被认可的形容词都以原形给出,如适用,将加入比较级和最高级表格。
A. 除非所有固态杂质在进入设备前从空气中过滤,否则它们会卡阻,经常在转子承受范围内减缓转子的转动。
B. 除非所有固态污染物在进入仪表前从空气中去除,否则它们会积累,通常在转子轴承中,并减慢转子的速度。
C. 如果空气中所有的固态污染物不在吸入仪表前去除,它们通常会在旋翼轴上聚集,并减慢旋翼速度。
A. Do the weighing procedure in this sequence.
B. In this order to perform the swapping procedure.
C. In this sequence to do the analysis procedure.