A、 依次执行以下工作以安全打开相应发动机上的左右侧反推。
B、 安全打开相应发动机上的左右侧反推来依次执行以下工作。
C、 依次执行以下工作以安全打开相应发动机上的左右侧推力杆。
答案:A
A、 依次执行以下工作以安全打开相应发动机上的左右侧反推。
B、 安全打开相应发动机上的左右侧反推来依次执行以下工作。
C、 依次执行以下工作以安全打开相应发动机上的左右侧推力杆。
答案:A
A. 在接触到升降舵调整片后缘时,将指示器归零。
B. 在接触到升降舵调整片前缘时,将指示器归零。
C. 当连接到升降舵调整片前缘时,将指示器一次性归零。
A. Do not jar the instruments
B. Do not pivot the instruments
C. Do not shake the instruments
A. The power plant uses an air vent or propeller to produce power.
B. The power plant develops thrust either through the exhaust or through a propeller.
C. The power plant generates propulsion with the aid of the exhaust or a propeller.
A. The tune time for a frequency not in memory is 2 to 4 seconds typical, 7 seconds maximum.
B. The adjust time for a frequency not in memory is 2 to 4 seconds typical, 7 seconds maximum.
C. The tune time for a frequency not in memory is 2 to 4 seconds common, 7 seconds maximum.
A. 对于飞机维修中的行为,法规中规定的要求很重要。
B. 了解法规的要求对于飞机维修来说非常重要。
C. 在飞机维修活动中,遵守法规是非常重要的。
A. 注:在本规范CAP III节的样例中,“前言”省略了,必要的信息已经包含在“目标”中了。
B. 注:第三节的CAP样本中省略了“前言”,“目标”中包含了必要的信息。
C. 注:CAP样例的第III节“前言”部分并未包含任何内容,相关必要信息已包含在“目标”部分中。
A. In the event of filler bonding to the tool, dip the tool in cold water.
B. If the filler bonds to the tool, avoid using water to moisten the tool.
C. If the filler sticks to the tool, make the tool wet by applying cold water.
A. Perform a test to identify the source of data transmission from the management unit.
B. Perform a test to determine if the management unit is transmitting the data.
C. Conduct a test to confirm that the management unit does not transmit the data.
A. 用干净的毛巾清洁表面。
B. 用干净的布擦表面。
C. 用干布擦表面。
A. The compressor needs to be equipped with a pressure regulator, air hoses, and an appropriate filter system to ensure that clean, dry, oil-free air is delivered to the nozzle.
B. A press regulator, air ducts, and a proper filtration system form the compressor, which surely delivers clean, dry, oily air to the spray nozzle.
C. For the compressor that ensures clean, dry, oilless air is delivered to the injector, it is necessary to be equipped with a pressurization regulator, air pipes, and an adequate filter system.