A、 长期的配平是通过垂直安定面运动实现的。
B、 水平安定面的运动是通过径向配平实现的。
C、 水平安定面的运动可以实现径向配平。
答案:C
A、 长期的配平是通过垂直安定面运动实现的。
B、 水平安定面的运动是通过径向配平实现的。
C、 水平安定面的运动可以实现径向配平。
答案:C
A. 确保维修飞机时不要撞到勤务箱。
B. 确保勤务车不要撞到飞机。
C. 确保勤务柜不要放在飞机的旁边。
A. 如果它明显地影响了巡航参数,重力的效果也应该纳入规划。
B. 如果它大大地改变了巡航表现,重量的效果也应该被考量。
C. 如果重量对巡航性能有显著影响,也应该将其影响列入计划。
A. 轮胎冷却后,气压降低。
B. 气压降低,而导致机轮冷却。
C. 气压降低的同时,而轮胎逐渐冷却。
A. 全推力情况下,刹车必须能够防止飞机移动。
B. 在最大推力下,制动器必须防止飞机摆动。
C. 在全推力情况下,刹车必须防止飞机启动。
A. 如果能简化、缩短文本或能使文本更容易理解,则应使用插图。
B. 应该使用插图,因为插图可以简化、缩短文本,并使文本更易理解。
C. 如果文本复杂、冗长或不易于理解,则应进行解释说明。
A. When simulating altitude, make sure you have alternate ATC transponders in active mode.
B. Make sure that the ATC transponders are in standby mode when you simulate altitude.
C. It is optional to keep the ATC transponders in ready mode during altitude simulation.
A. 转矩表是指显示传动轴上可用的输出转矩的指示系统。扭矩可能显示为维度的尺寸,例如英尺-磅,或者参考定义,用百分比或压力值表示。
B. 扭矩表是指显示传动轴上可输出的扭矩指示系统。扭矩可以用尺寸来表示,如英尺-磅,也可以用百分数或压力等参考术语表示。
C. 扭矩表显示传动轴可以输出的扭矩指示系统。扭矩可以用尺寸表示,如英尺-磅,或是用百分数、压力等参考术语表示。
A. If a symbol or device is established for a valve or control, it shall be used for this type of unit throughout the manual. The symbols used should be shown and identified in a legend block on the schematic diagram.
B. If a symbol or device has been set up to a valve or control, the equipment type will be referred to as this symbol or device throughout the manual. The legend block in the diagram displays or identifies symbols or device.
C. If a symbol or design is specified for a valve or control, this type of device is used throughout the section of the manual. The symbols used can be found and identified in the legend block of the schematic.
A. A version means modifying the information in the existing manual.
B. A revise explains correcting information in an old manual.
C. A revision means a modification of information in an existing manual.
A. 停止测试2秒钟
B. 2秒后启动测试
C. 2秒后终止测试