The circulation of the air in the components is such that the temperature for specific component is not out of the limit.

A. This configuration has three rest data for all the inertial and air data functions.

B. This configuration has triple redundant data for all the inertial and air data functions.

C. This configuration has three rest data for all the interface and air data functions.

A. Clamps should be spaced at intervals not exceeding 24 inches. Clamps on wire bundles should be selected so that they have a snug fit without pinching wires.

B. Pins should be spaced at intervals not exceeding 24 inches. Pins on harness should be selected so that they have a snug fit without pinching wires.

C. Pins should be spaced at intervals not exceeding 24 inches. Pins on harness should be selected so that they have a snug fit without scratching wires.

A. Record the results if the frequency changes.

B. Alter the phase and record the results.

C. Change the frequency and record the results.

A. 描述飞机电源系统时，应提供相关限制、警告和操作提示。

B. 描述飞机电源系统时，应解释相关束缚、警示和操作提示。

C. 描述飞机电源系统时，应提供相关限制、警告和操作警示。

A. Those units and components are used to keep account of data that is unrelated to a particular system.

B. The purpose of those units and components is to obtain values that are independent of a particular system.

C. The function of these units and components is to save the files that have nothing to do with a peculiar system.

A. The FAA-Approved Airworthiness Limitations shall be prepared as a separate document for inclusion in the Maintenance Manual and for insertion in the “Limitations Section” of the Pilot＇s Operating Handbook.

B. FAA-approved Airworthiness Restrictions should be prepared as a separate document and included in the “Restrictions Section” of the Maintenance Manual and the Pilot’s Operating Manual.

C. The airworthiness restrictions approved by FAA should be prepared as separate documents and included in the "Limitations" section of the Maintenance Manual and the "Pilot Operations Manual".

A. 拆除校装销和设备，以阻止控制舵面的自由运动。

B. 拆除校装销，安装能够阻止控制舵面自由移动的设备。

C. 拆除能够阻止控制舵面自由移动的校装销和设备。

A. 可以通过拆下保护盖来接近机械装置。

B. 重新安装保护盖来接近机械装置。

C. 拆下保护盖来获得机器。

A. 电气/电子面板和多用途部件上的图示涵盖了部分重要的通用电气和电子部件。

B. 电气/电子面板和多用途部件涵盖了所有通用电气和电子部件。

C. 电气/电子面板和多用途部件上的文字说明涵盖了所有通用电气和电子部件。

A. A mixture of fuel and oxygen can cause an explosion.

B. Fuel and oxygen react with each other to cause explosion.

C. A mixture of fluid and oxygen can be set on fire.