A、 我们的目的是提供持续的、满足工业标准的持续适航标准。
B、 我们的目的是提供一致的、行业标准化的持续适航方案。
C、 我们的任务是提供完整的、行业标准的持续适航计划。
答案:B
A、 我们的目的是提供持续的、满足工业标准的持续适航标准。
B、 我们的目的是提供一致的、行业标准化的持续适航方案。
C、 我们的任务是提供完整的、行业标准的持续适航计划。
答案:B
A. Do not jar the instruments
B. Do not pivot the instruments
C. Do not shake the instruments
A. To know what you want to say and to use the words that give the wanted meaning shall always be assured.
B. In order to express the meaning that you want, always make sure that you know what you want to say and you use the words.
C. Always make sure that you use what you want to say to express the words with the meaning that you want.
A. Ensure that you do activate the control adjacent to it.
B. Adjust the adjacent control for optimal results.
C. Make sure that you do not operate the adjacent control.
A. Clean the surface to make sure that the sealing is satisfactory.
B. Clean surfaces to ensure the bonding as required.
C. Clean the surface to make sure that the bond is satisfactory.
A. 程序应在每章内按编号顺序进行准备,并有适当的主次科目标题,无需从新的页面开始。
B. 程序应在每章内按照主次标题和参考号的形式进行编写,不需要从新的页面的开头开始。
C. 程序应在每章内按参考编号顺序编制,并有适当的主、副标题,而无需从新页的顶部开始。
A. 纠正措施在适航指南中给出,如检查,维修或改装,在适航指南中详细说明,或在另外一个文件中给出,如制造厂家服务通告,该服务通告在适航指南中作为参考。
B. 适航指令描述的纠正措施,比如检查、修理或改装的具体要求,可由适航指令详细给出,或包含在另外一个文件中,如制造厂家服务通告,该服务通告在适航指令中列为参考文件。
C. 适航指令或另一个文件,如制造厂家服务通告可详细给出检查、修理或大修等纠正措施,该服务通告刊登在适航指令中作为参考。
A. You need to open the cargo door when the windspeed exceeds 30 knots.
B. Wait for the wind speed to increase to over 30 knots before opening the cargo door.
C. You are allowed to open the cargo door when the wind speed reduces to less than 30 knots.
A. 如果危险被含糊描述,人员在执行任务时要了解风险,并更加小心。
B. 危险是否被清楚说明,以致于执行任务的人是否有必要了解风险,并更加小心。
C. 如果清楚说明了危险,执行任务的人就会了解风险,且更加小心。
A. 作对比的代词和把“more”和“most”作为最高级的代词在字典中不会列出这些形式,因为“more”和“most”也列出了批准的词。
B. 以“more”和“most”作比较级和最高级的形容词不会在字典中列出这些形式,因为“more”和“most”也被列为批准词。
C. 有比较级和最高级的副词由“more”和“most”构成,不会被收录在词典中,因为“more”和“most”也列出了被允许的词。
A. Ensure that no other repairs are underway in the repair area before undertaking this procedure.
B. This procedure can only be done if there are other repairs in the repair area.
C. Only proceed with this procedure if there are concurrent repairs being carried out in the designated repair area.