If possible, supply sufficient examples from your technical documentation to support your proposal.

A. 标题页的背面应留白，以避免版本更新以及插入的飞机生产线号和注册号丢失的情况。

B. 标题页的背面应留白，以免需要改版，以及可能遗漏插入的飞机序列号和注册号。

C. 在标题页的背面留空以便于修订需要，同时避免丢失插入的飞机序列号和生产线号。

A. This format may be used in integra or in part.

B. This format may be used in its entirety or in part.

C. This format may be used in its tacticallity or in part.

A. Guarantee a consistent performance of the probe.

B. Maintain an uninterrupted movement of the probe.

C. To ensure continuous movement, the probe must be kept in motion.

A. Sentence forms shall be simple and direct, avoiding the obvious, the elementary and discussions of theory except where essential for practical understanding and application.

B. Sentence forms shall be simple and direct, avoiding the obvious and the elementary, and omitting discussions of theory except where essential for practical understanding and application.

C. Sentence forms shall be simple and direct so as to avoid the obvious and the elementary, and to omit discussions of theory except where essential for practical understanding and application.

A. Push the applicable button to eject the disk drive.

B. Press the applicable key to pop out the tape actuator.

C. Compress the applicable button to jet the disk actuator.

A. It is suggested that nickel plated corrosion resistant steel or nickel plated steel fittings be used as alternatives for aluminum fittings in the high pressure and normal brake return systems between the antiskid module and parking brake module.

B. Suggest to use vanadium plated corrosion resistant steel or vanadium plated steel fittings as alternatives for aluminum fittings in the high pressure and normal brake return systems between the antiskid module and parking brake module.

C. It is recommended that cadmium plated corrosion resistant steel or cadmium plated steel fittings be used as replacements for aluminum fittings in the high pressure and normal brake return systems between the antiskid module and parking brake module.

A. Refer to FIG. 401 for the distance between rivets.

B. If you want to know the distance between bolts, refer to FIG. 401.

C. Look at FIG. 401 for the dimension between bolts.

A. Cut the shim to the correct size.

B. Trim the washer to the correct size.

C. Cut the patch to the correct dimension.

A. Repair or replace the wire bundle or conduit per the requirements of AMM.

B. Refer to the requirements of AMM repair or relocate the wire bundle or conduit.

C. According to AMM require to repair or change the wire bundle or conduit.

A. The engine-driven pump is the major pump that works endless when it is switched on.

B. The engine-driven pumps are the main pumps that runs continuously during operation.

C. The engine-driven pumps are the secondary pumps that operates infinitely after running.