A、 增加 0.02 mm 以达到标准圆柱耦合器的正确间距。
B、 添加 0.02 mm 以使得标准万向轴正确脱开。
C、 添加 0.02 mm 以获得标准球形联轴器的正确间隙。
答案:C
A、 增加 0.02 mm 以达到标准圆柱耦合器的正确间距。
B、 添加 0.02 mm 以使得标准万向轴正确脱开。
C、 添加 0.02 mm 以获得标准球形联轴器的正确间隙。
答案:C
A. Do a thorough check of the hydraulic system.
B. Do a check of the hydraulic system carefully.
C. Do a check of the hydraulic system again.
A. Solenoid switches shall indicate whether the valve is solenoid-loaded to the open or closed positon.
B. Electromagnetic valves shall include a marking indicating whether the valve is coil-loaded to the open or closed positon.
C. Solenoid valves shall include a notation indicating whether the valve is spring-loaded to the open or closed positon.
A. If the hydraulic pump turns to generate pressure of 3000 psi, use the electric pump.
B. If the hydraulic pump fails to generate pressure of 3000 psi, use the electric pump.
C. If the hydraulic pump turns to supply pressure of 3000 psi, use the electric pump.
A. 侧向移动张力表。
B. 移动张力表测量长电缆。
C. 沿着钢索移动张力计。
A. 风挡出口是在机长和副驾的挡风口前面。
B. 风挡出口是在机长和副驾遮光板的前面。
C. 风挡出口是在机长和副驾操作板的前面。
A. Sometimes, FAA and other airworthiness authority may accept the Continuing Airworthiness Program that uses the Specification.
B. Sometimes, we use the Specification to prepare a Continuing Airworthiness Program that will be accepted by non-FAA airworthiness authority.
C. Sometimes, during preparing a Continuing Airworthiness Program, using the Specification may be accepted by FAA and other airworthiness authority.
A. The Check List may be designed by "Challenge" and "Response" headings or by "Item" and "Condition" headings for two pilot airplanes or for single pilot Airplanes.
B. The Check List for the pilot may be set by "Challenge" and "Response" headings for two airplanes or by "Item" and "Condition" headings for single Airplane.
C. For two pilot airplanes, "Challenge" and "Response" headings may be used on the Check List. For single pilot Airplanes, "Item" and "Condition" headings may be used.
A. You can get the corrected velocity by dividing the aircraft velocity by the crosswind component.
B. Divide the crosswind component by the aircraft speed to get the correction.
C. Divide the aircraft speed by the crosswind component to get the correction.
A. 用净水清洗内表面。
B. 用温水清洗外表面。
C. 用冷水清洗外表面。
A. 数据库更新正在等待中。
B. 数据库同步正在进行中。
C. 数据库升级正在按顺序进行。