If you use too much paint, the finish will be unsatisfactory.

A. 更换零件的话，要持续处于低气压状态。

B. 如果持续处于低气压状态，就需要维修零件。

C. 如果低压状态持续，则更换组件。

A. Make sure that the parts or surface layer are dry and free from uncontamination.

B. Make sure that the parts or surface layer are dry and free from contamination.

C. Make sure that the parts or surface lamination are dry and free from contamination.

A. 给出控制面板的原理图或图片。

B. 画出娱乐面板的示意图或图片。

C. 提供仪表板的图纸或图片。

A. Sudden changes in temperature can adjust the internal logic.

B. The internal logic adjusts to sudden changes in temperature.

C. The internal logic can be adjusted by sudden changes in temperature.

A. The Handbook should refer to FAR Part 43 for list of things the pilot may do.

B. FAR Part 43 has a list of things the pilot may do.

C. FAR Part 43 recommends a manual that contains a list of things the pilot may do.

A. 这个日期模块告诉你如何操作这个单位。

B. 这个数据模块告诉你如何计算这个单元。

C. 这个数据组件告诉你如何操作这个装置。

A. Explain check them whether normal or not, and how to identify a fault.

B. Make clear that if they operate properly and how to isolate the malfunction.

C. Explain how to check them for proper operation and how to recognize a malfunction.

A. 数据应显示最大飞机重量条件下、油门关闭时，不同襟翼构型、滚转角条对应的指示空速和校正空速。

B. 数据应以指示空速和校准空速与襟翼配置和最大重量时关闭油门的坡度角来表示。

C. 数据应显示为指示空速和标定空速与襟翼配置以及节气门关闭时最大重量下的倾斜角度。

A. “站点”是一个距参考基准面某个距离的位置。

B. “站位”指沿飞机机身的位置,以到基准面的距离来表示。

C. “站位”是飞机机翼上的一个位置，用与参考基准面的距离表示。

A. Use white paper with good strength characteristics and enough weight and substance to eliminate excessive print leakage when printing on both sides.

B. Use good white paper with high strength quality and of adequate weight to delete excessive show-through when printed on both sides.

C. Use white paper with good strength and of sufficient weight and substance to prevent overmuch ink show-through the paper when printed on both sides.