This includes sensing, computing, actuating, indicating, and warning devices such as computers,servos, actuators, warning lights, etc.

A. The forward movement of the control lever must be slow and continuous.

B. The control lever must be kept moving forward slowly and abruptly.

C. You must continuously slow down the forward movement of the control lever .

A. 描述飞机发动机时，应描述进气系统包括： 1.空气流动路径 2.保护结冰 3.筛选 4.增压/涡轮增压 5.限制、警告、提示

B. 描述飞机发动机时，应描述有关进气系统的以下信息： 1.气路 2.防冰 3.过滤器 4.增压/涡轮增压 5.限制、警告、提示

C. 描述飞机发动机时，应描述吸气系统包括： 1.空气流动路径 2.防冰 3.过滤 4.增压/涡轮增压 5.限制、警告、提示

A. Propellers must be overhauled in a satisfactory shop which should be supplied by the propeller manufacturer in accordance with data.

B. Overhaul of propellers and the shop must meet the data of the propeller manufacturer.

C. Overhaul of propellers must be accomplished in a qualified shop in accordance with data supplied by the propeller manufacturer.

A. 这个单元的主要函数是控制燃油流动。

B. 这个装置的主要功能是控制燃油流量。

C. 这个组件的辅助功用是控制燃油流动。

A. Make the necessary repairs during the next applied spot check.

B. Make the required repairs during the next applicable preliminary inspection.

C. Make the necessary repairs during the next applicable scheduled maintenance.

A. The component was damaged badly, the repairing cost is over 60% of the total price. The workshop suggests reporting as an unserviceable part.

B. The component was damaged heavily; the repairing cost is over 60% of the total price. The workshop suggests scrapping.

C. The component was destroyed heavily; the repairing cost is 60% of the total price. The workshop suggests segregation.

A. That section of the systems which controls the position and rotation of the trailing edge flaps.

B. That portion of the systems which controls the position and movement of the trailing edge flaps.

C. That part of the systems which controls the position and rotation of the flaps.

A. A mixture of fuel and oxygen can cause an explosion.

B. Fuel and oxygen react with each other to cause explosion.

C. A mixture of fluid and oxygen can be set on fire.

A. 当您提供液压时，确保操纵杆不会接触停止（1）。

B. 当您施加液压时，确保连杆不接触止动块（1）。

C. 当您使用液压时，确保操纵杆不接触止动块（1）。

A. When the cumulative revised pages (including back-up pages) exceeds 60% of the total pages of the manual, a reissue should be prepared.

B. If the updated pages, including back-up pages, were less than 60% of the total page of the manual, a new manual should be copied.

C. Up to 60% of total pages (including back-up pages) were accumulated by mistake, the manual should be rewritten.