A、 确保襟翼和副翼微调手轮已收回并处于零位置。
B、 确保襟翼收起到零位,且副翼配平手轮处于零位。
C、 确保襟翼收上,副翼配平手轮处于零位。
答案:C
A、 确保襟翼和副翼微调手轮已收回并处于零位置。
B、 确保襟翼收起到零位,且副翼配平手轮处于零位。
C、 确保襟翼收上,副翼配平手轮处于零位。
答案:C
A. 转矩表是指显示传动轴上可用的输出转矩的指示系统。扭矩可能显示为维度的尺寸,例如英尺-磅,或者参考定义,用百分比或压力值表示。
B. 扭矩表是指显示传动轴上可输出的扭矩指示系统。扭矩可以用尺寸来表示,如英尺-磅,也可以用百分数或压力等参考术语表示。
C. 扭矩表显示传动轴可以输出的扭矩指示系统。扭矩可以用尺寸表示,如英尺-磅,或是用百分数、压力等参考术语表示。
A. Drain the used oil into a container.
B. Pump the used oil into a container.
C. Suck the used oil into a container.
A. The lower seal is invisible prior to switching the lower bearing on.
B. The lower seal becomes visible when you push the lower bearing up.
C. The lower seal comes into view when you pull the lower bearing down.
A. 发动机防冰系统能消除和防止因引气产生的发动机部件结冰(不包括整流罩),包含活门、管路、调节器等零件。
B. 发动机防冰系统包括活门、管路、调节器等部件,能通过引气消除和预防发动机所有部件结冰(不包括整流罩)。
C. 发动机防冰系统是用于消除和防止发动机所有部件结冰的系统部分(不包括整流罩),包括活门、管路、调节器等项目。
A. Turn the body of the closure assist assembly with a wrench to pull the two thrust reverser doors together until you can engage the latches at the bottom of the doors.
B. Turn the main body of the closing aid with a crowfoot and pull the two throttle reverser doors together until you can connect the bolts at the bottom of the door.
C. Use a wrench to turn the main body of the closing auxiliary assembly and pull the two reverse doors together until you can attach the locks at the bottom of the door.
A. Detach the sensor to establish a physical connection with the adjoining structure.
B. Install the sensor to block access to the adjacent structure.
C. Take out the sensor to reach to the neighboring structure.
A. 设备冷却系统的低流量传感器给出警告,没有足够冷气。飞机在地面时,当出现供气系统低流量时,机组打电话报告警报声。
B. 没有冷却气流供应时,设备冷却系统有低流量探测器来发出警告。在地面上,当供气系统检测到低流量时,机组人员会发出呼号警报。
C. 冷却气流不足时,设备冷却系统低流量探测器发出警告。当飞机在地面时,如果供气系统中探测到低流量,机组人员呼叫喇叭响起。
A. 外圆周长必须与内圆周长相匹配。
B. 外侧半径必须与内侧半径等比例。
C. 外径必须与内径同心。
A. 紧急停车不包含这些部件。
B. 应急关闭不包括组件本身。
C. 临时关停不包括他们的部门。
A. PI 上显示完成数据复制所需的剩余时间。
B. PI显示的是复制数据所需要的时间。
C. PI上显示剩余时间以便完成数据的复制。