A、 GAMA规范1的此修订版包含了NTSB建议及增压器/涡轮增压器故障的应急程序。
B、 本版本的GAMA1号规范采用了NTSB的建议,纳入了增压器/涡轮增压器失效的应急程序。
C、 本版本的GAMA1号规范建议NTSB使用增压器/涡轮增压器失效应急程序。
答案:B
A、 GAMA规范1的此修订版包含了NTSB建议及增压器/涡轮增压器故障的应急程序。
B、 本版本的GAMA1号规范采用了NTSB的建议,纳入了增压器/涡轮增压器失效的应急程序。
C、 本版本的GAMA1号规范建议NTSB使用增压器/涡轮增压器失效应急程序。
答案:B
A. As the depressurization of the alternate system, the hydraulic system A must be released to open the rudder hydraulic system selector valve and permit hydraulic fluid to flow to the rudder actuator below.
B. In order to depressurize standby system, the hydraulic system A must be depressurized to open the rudder hydraulic system selector valve and let hydraulic fluid flow to the lower rudder actuator.
C. Due to the depressurization of the alternate system, the hydraulic system A must be released to open the rudder hydraulic system selector valve and permit hydraulic fluid to flow to the bottom rudder actuator.
A. The values must be less than the approved differences.
B. The values must not exceed the allowable differences.
C. The values must be less than the allowable differences.
A. 所有发行物应使用统一的编号系统进行索引从而进行主题事项分配。
B. 所有出版物应使用标准编号系统进行索引和主题事项分配。
C. 所有发行物应使用标准的编号索引系统来完成主题事项分配。
A. 解除离合器可以防止启动发动机时发生意外。
B. 在启动发动机之前,脱开离合器。
C. 拆卸离合器,启动发动机。
A. Move any of the four bolts.
B. Remove one of the four bolts.
C. Remove each of the four bolts.
A. Different meanings occur when words are combined in different ways.
B. When words can link up in different ways, ambiguity occurs.
C. Misunderstanding happens when words are contained in different modes.
A. 风扇和增压器是一个四级压气机。
B. 增压器是一个四级压气机风扇。
C. 风扇是一个四级增压器的压气机。
A. Charge the battery.
B. Fill the battery.
C. Add the battery.
A. If liquid spills in the kitchen, all traces of the liquid must be cleaned promptly and the concerned area must be completely dry.
B. If liquids are spilled inside the galley, you must remove all signs of liquid and fully dry the areas of contamination immediately.
C. If liquid spills in the galley, all marks of the liquid must be removed at once and the polluted area must be completely dried.
A. 拧松螺钉,但同时不要给它们打力矩。
B. 拧紧螺栓,但此时不要扭矩它们。
C. 拧紧螺母,但此时不要给它们打力矩。