APP下载
首页
>
财会金融
>
民用航空器维修人员执照英语参考试题-共3257题(核对版)202402
搜索
民用航空器维修人员执照英语参考试题-共3257题(核对版)202402
题目内容
(
单选题
)
For airplanes certificated after January 1, 1985, regardless of certification basis, the speed(s) at the 50 foot obstacle may not be less than 20% above the power-off stall speed for the same airplane configuration.

A、 对于1985年1月1日之后认证的飞机,无论认证基础如何,50英尺障碍物处的速度不得低于相同飞机构型发动机关断下失速速度的20%。

B、 对于1985年1月1日之后审定合格的飞机,无论审定基础如何,达到越障高度50英尺时的速度不得低于相同构型下无动力失速速度的1.2倍。

C、 对于1985年1月1日之后审定合格的飞机,无论审定基础如何,达到越障高度50英尺时的速度不得低于相同构型下无动力失速速度的1.2倍。

答案:B

民用航空器维修人员执照英语参考试题-共3257题(核对版)202402
气动系统从气动气源获取压缩空气,并通过管道向用户系统供应压缩空气。
https://www.shititong.cn/cha-kan/shiti/0005eb2d-3304-8527-c098-d34cb90f9100.html
点击查看题目
If you cannot remove a bolt because of corrosion, apply penetrating oil.
https://www.shititong.cn/cha-kan/shiti/0005eb2d-32f5-65b9-c098-d34cb90f9100.html
点击查看题目
If the initialization setup is correct, AUTOTEST IN PROGRESS will show on the CDU display.
https://www.shititong.cn/cha-kan/shiti/0005eb2d-32f0-3414-c098-d34cb90f9100.html
点击查看题目
Bare metal surfaces are usually satisfactory for an electrical bond.
https://www.shititong.cn/cha-kan/shiti/0005eb2d-32fd-5b65-c098-d34cb90f9100.html
点击查看题目
The external diameter must be concentric to the internal diameter.
https://www.shititong.cn/cha-kan/shiti/0005eb2d-32fd-808c-c098-d34cb90f9100.html
点击查看题目
Loosen the nut one full turn.
https://www.shititong.cn/cha-kan/shiti/0005eb2d-32eb-59dd-c098-d34cb90f9100.html
点击查看题目
不在存储器中的频率调谐时间通常为2到4秒,最大为7秒。
https://www.shititong.cn/cha-kan/shiti/0005eb2d-3304-2cb7-c098-d34cb90f9100.html
点击查看题目
If this maneuver cannot be performed safely, a warning against attempting it shall be provided.
https://www.shititong.cn/cha-kan/shiti/0005eb2d-32f6-d6a6-c098-d34cb90f9100.html
点击查看题目
针对飞机类别适合的机动飞行,应提供以下信息:(a)获准的机动飞行以及合适的进入速度的相关信息;(b)未获授权的机动飞行的相关信息;(c)已获准或未获准或不适合进行螺旋训练的相关信息。
https://www.shititong.cn/cha-kan/shiti/0005eb2d-32fa-9fd1-c098-d34cb90f9100.html
点击查看题目
在高压电环境下工作时,请遵守安全注意事项。
https://www.shititong.cn/cha-kan/shiti/0005eb2d-3303-e84c-c098-d34cb90f9100.html
点击查看题目
首页
>
财会金融
>
民用航空器维修人员执照英语参考试题-共3257题(核对版)202402
题目内容
(
单选题
)
手机预览
民用航空器维修人员执照英语参考试题-共3257题(核对版)202402

For airplanes certificated after January 1, 1985, regardless of certification basis, the speed(s) at the 50 foot obstacle may not be less than 20% above the power-off stall speed for the same airplane configuration.

A、 对于1985年1月1日之后认证的飞机,无论认证基础如何,50英尺障碍物处的速度不得低于相同飞机构型发动机关断下失速速度的20%。

B、 对于1985年1月1日之后审定合格的飞机,无论审定基础如何,达到越障高度50英尺时的速度不得低于相同构型下无动力失速速度的1.2倍。

C、 对于1985年1月1日之后审定合格的飞机,无论审定基础如何,达到越障高度50英尺时的速度不得低于相同构型下无动力失速速度的1.2倍。

答案:B

民用航空器维修人员执照英语参考试题-共3257题(核对版)202402
相关题目
气动系统从气动气源获取压缩空气,并通过管道向用户系统供应压缩空气。

A. The pneumatic system gets compressed air from the pneumatic air sources and supplies the compressed air through ducts to the user systems.

B. The pneumatic system gets compressed air from the pneumatic air sources and supplies the compressed air through manifold to the user systems.

C. The pneumatic system gets comprised air from the pneumatic air sources and supplies comprised the air through ducts to the user systems.

https://www.shititong.cn/cha-kan/shiti/0005eb2d-3304-8527-c098-d34cb90f9100.html
点击查看答案
If you cannot remove a bolt because of corrosion, apply penetrating oil.

A. 如果由于腐蚀你不能拆卸螺栓,则涂渗透油。

B. 如果你不能去除螺栓的腐蚀,则申请穿透油。

C. 如果你由于防腐不能拆卸螺钉,则涂渗透油。

https://www.shititong.cn/cha-kan/shiti/0005eb2d-32f5-65b9-c098-d34cb90f9100.html
点击查看答案
If the initialization setup is correct, AUTOTEST IN PROGRESS will show on the CDU display.

A. 如果最初的设置已更正,将在CDU显示器上显示“自动测试完成”。

B. 如果初始化设置正确,将在CDU显示屏上显示“自动测试进行中”。

C. 如果“自动测试正在进行”显示在CDU显示屏上则表明初始化设置正确。

https://www.shititong.cn/cha-kan/shiti/0005eb2d-32f0-3414-c098-d34cb90f9100.html
点击查看答案
Bare metal surfaces are usually satisfactory for an electrical bond.

A. 裸露的金属表面通常适合电搭接。

B. 纯金属表面通常适用于电气连接。

C. 金属搭接面通常具有良好的电气连接效果。

https://www.shititong.cn/cha-kan/shiti/0005eb2d-32fd-5b65-c098-d34cb90f9100.html
点击查看答案
The external diameter must be concentric to the internal diameter.

A. 外圆周长必须与内圆周长相匹配。

B. 外侧半径必须与内侧半径等比例。

C. 外径必须与内径同心。

https://www.shititong.cn/cha-kan/shiti/0005eb2d-32fd-808c-c098-d34cb90f9100.html
点击查看答案
Loosen the nut one full turn.

A. 把螺帽拧松一圈。

B. 拧紧螺帽半圈。

C. 拧紧螺帽一圈。

https://www.shititong.cn/cha-kan/shiti/0005eb2d-32eb-59dd-c098-d34cb90f9100.html
点击查看答案
不在存储器中的频率调谐时间通常为2到4秒,最大为7秒。

A. The tune time for a frequency not in memory is 2 to 4 seconds typical, 7 seconds maximum.

B. The adjust time for a frequency not in memory is 2 to 4 seconds typical, 7 seconds maximum.

C. The tune time for a frequency not in memory is 2 to 4 seconds common, 7 seconds maximum.

https://www.shititong.cn/cha-kan/shiti/0005eb2d-3304-2cb7-c098-d34cb90f9100.html
点击查看答案
If this maneuver cannot be performed safely, a warning against attempting it shall be provided.

A. 如果不能安全执行此地面移动操作,警告不要再次尝试它。

B. 如果不能安全执行此操作,应提供警告不要再次尝试此操作。

C. 如果不能安全执行此操作,应提供警告不要尝试此操作。

https://www.shititong.cn/cha-kan/shiti/0005eb2d-32f6-d6a6-c098-d34cb90f9100.html
点击查看答案
针对飞机类别适合的机动飞行,应提供以下信息:(a)获准的机动飞行以及合适的进入速度的相关信息;(b)未获授权的机动飞行的相关信息;(c)已获准或未获准或不适合进行螺旋训练的相关信息。

A. The following information on maneuvers appropriate to the Airplane Category shall be given: (a) A Statement of Authorized Maneuvers and Appropriate Entry Speeds (b) A Statement of Unauthorized Maneuvers (c) A Statement that the airplane is Approved for Spins, Unapproved for Spins, or is characteristically incapable of spinning.

B. The following information should be provided to the maneuver flight as appropriate: (a) A Statement of Entry Speed for Authorized Maneuvers (b) A Statement of Unauthorized Maneuvers (c) A Statement that aircraft is Unapproved or not suitable for Spinning.

C. The following appropriate information should be provided to the aircraft maneuvers: (a) A Statement of Appropriate Entry Speed for maneuvers flight (b) A Statement of Unauthorized maneuvers (c) A Statement that aircraft has been unapproved for Spins, or is characteristically incapable of spinning.

https://www.shititong.cn/cha-kan/shiti/0005eb2d-32fa-9fd1-c098-d34cb90f9100.html
点击查看答案
在高压电环境下工作时,请遵守安全注意事项。

A. Obey the safety precautions when you do work with high voltages.

B. Obey the safety warnings when you do work with high impedance.

C. Obey the safety cautions when you do work with high capacitance.

https://www.shititong.cn/cha-kan/shiti/0005eb2d-3303-e84c-c098-d34cb90f9100.html
点击查看答案
试题通小程序
试题通app下载