A、 检验/查找部分应提供访问和检验或查找系统、单元或区域所需的信息和程序。
B、 检验/检查部分应提供接近和检验或检查系统、装置或区域所需的信息和程序。
C、 监控/检查部分应提供访问和监控或检查系统、装置或区域所需的信息和程序。
答案:B
A、 检验/查找部分应提供访问和检验或查找系统、单元或区域所需的信息和程序。
B、 检验/检查部分应提供接近和检验或检查系统、装置或区域所需的信息和程序。
C、 监控/检查部分应提供访问和监控或检查系统、装置或区域所需的信息和程序。
答案:B
A. If an AC circuit consists of resistance only, the value of the impedance is the same as the resistance.
B. If an AC circuit consists of impedance only, the value of the capacitance is the same as the impedance.
C. If an DC circuit has capacitance only, the value of the resistance is the same as the capacitance.
A. 本工作为准备飞机航班而给出维护步骤,以防两个空调组件失效。
B. 在两个空调组件关闭的情况下,本工作给出了为飞机飞行做准备的维护步骤。
C. 本工作给出了在两个空调组件均不工作的情况下为飞机飞行做好准备的维护步骤。
A. 逆时针转动调整器5圈。
B. 依次转动调节器的5个旋钮。
C. 逆时针转动调节器5个单位。
A. Select the specific system that you will apply pressure to.
B. Select the hydraulic system that you will pressurize.
C. Identify the hydraulic system that you will bleed.
A. Reserve the inflammable material at least 50 inches away from the work area.
B. Deposit the explosive substance out of 50 feet with the work area.
C. Keep flammable materials at a minimum distance of 50 feet from the work area.
A. In order to obtain additional clearance, gaskets may be added.
B. Additional shims may need to be added to obtain proper clearance.
C. Add special shims as necessary may vary the clearance.
A. Loosen the cross nuts [10] on reducer [7] and standby valve [8] on each end of air pressure filter assembly [1].
B. Loosen the swivel nuts [10] on reducer [7] and bypass valve [8] on each end of air pressure filter assembly [1].
C. Loosen the cotter nuts [10] on reducer [7] and bypass valve [8] on each end of air pressure filter assembly [1].
A. If the lamp is too weak, charge the battery.
B. If the light is too strong, do a replacement of the battery.
C. If the light is not bright, the battery should be replaced.
A. It includes items such as the inflation of shock struts.
B. It includes items such as the deflation of shock struts.
C. It includes items such as the lubrication of shock struts.
A. Assess the requirements of washers.
B. Evaluate the amount of clamps required.
C. Calculate the number of shims that are necessary.