A、 其他条款中给出了未在本节涉及的且法律要求的或局方允许或规定的任何限制的声明。
B、 其他限制提供了法规要求的或监管当局允许或批准的任何限制的说明,但本节未特别涉及。
C、 其他限定条款提供了任何限定条款的内容,这些内容是法规要求的或局方允许或规定的,未在本节特别说明。
答案:B
A、 其他条款中给出了未在本节涉及的且法律要求的或局方允许或规定的任何限制的声明。
B、 其他限制提供了法规要求的或监管当局允许或批准的任何限制的说明,但本节未特别涉及。
C、 其他限定条款提供了任何限定条款的内容,这些内容是法规要求的或局方允许或规定的,未在本节特别说明。
答案:B
A. 拧紧这些同轴接头(用手上紧再1/8转)
B. 拧紧这些同轴接头(用手上紧少1/8转)
C. 拧紧这些同线路接头(用手上紧少1/8转)
A. 仔细评估损伤区域。
B. 仔细测量损伤区域。
C. 仔细评估磨损区域。
A. After 10 flight cycles or 25 flight hours, which comes first, the rod end bearing shall be discarded if its wear is greater than 0.010 inch of diameter.
B. If the rod end bearing wear is greater than 0.010 inch in radial play, reject it within next 10 flight cycles or 25 flight hours whichever comes first.
C. Destroy the rod end bearing during 10 flight cycles or 25 flight hours when its wear is more than 0.010 inch of its radius, whichever comes first.
A. 所有发行物应使用统一的编号系统进行索引从而进行主题事项分配。
B. 所有出版物应使用标准编号系统进行索引和主题事项分配。
C. 所有发行物应使用标准的编号索引系统来完成主题事项分配。
A. 当你在油箱附近工作时,一定要有人时不时在油箱附近。
B. 当你在油箱里工作时,必须有一个人一直在油箱附近。
C. 当你在油箱里工作时,可以有一人在油箱附近陪同。
A. To work with electrical cable, we need tools specifically vattmeter, amperemetres and ohm meters.
B. To work with electrical cable, vattmeter, amperemetres and ohm meters are helpful tools.
C. In order to work with electrical circuit, we need tools specifically voltmeter, amperemetres and ohm meters.
A. 对2号发动机进行维修。
B. 对2号发动机进行改装。
C. 对2号发动机进行大修。
A. Describe how to operate the safety belt and wire harnesses.
B. Tell the way to use the seat and shoulder belts.
C. The seat and shoulder harness should be used by the pilot.
A. Due to the incorrect level of pressure, the system will not work.
B. As long as the fluid level remains unstable, the system will fail.
C. Because the fluid level is incorrect, the system will not operate.
A. The function of the portable water system is to store and send drinking water to the passengers.
B. The potable water system must keep and transfer the water to the toilet for washing only.
C. The purpose of the drinking water system is to store and deliver the water for drinking.