This chapter shall provide that information considered necessary by the manufacturer to properly level the aircraft for any of the various maintenance, overhaul or major repairs which might become necessary during the life of the aircraft .

A. Use a filter to remove unwanted material from the oil.

B. Use a valve to remove unwanted material from the gas.

C. Use a filter to remove unwanted material from the fluid.

A. 螺旋桨恒速机构故障。

B. 螺旋桨恒速机构被挡住了。

C. 螺旋桨恒速传动机构不在这个位置。

A. Remove the smooth areas with cotton cloth if you find them.

B. If you find alligatored areas, remove them with cotton cloth.

C. If there are rough areas, remove them with emery cloth.

A. 异种金属腐蚀是指当两种或以上的不同金属在电解质下相互接触时发生的腐蚀现象。在这种情况下，金属之间会形成电化学反应，导致其中一种金属比其自身单独存在时更快地被腐蚀。

B. 异种金属腐蚀是指当两种或以上的不同金属在电位下相互接触时发生的腐蚀现象。在这种情况下，金属之间会形成电化学反应，导致其中一种金属比其自身单独存在时更快地被腐蚀。

C. 不同的金属腐蚀是指当两种或以上的不同金属在电荷下相互接触时发生的腐蚀现象。在这种情况下，金属之间会形成电化学反应，导致其中一种金属比另一种腐蚀得快。

A. 结果是，孔的直径达到了允许的最大值。

B. 结果是，允许孔的尺寸超出最大范围。

C. 结果是，孔的尺寸大于允许的最大尺寸。

A. A three-axis accelerometer gives acceleration data of the horizontal, lateral, and longitudinal axis. The flight data recorder system sensors send data about the position of the flight surfaces and controls the FDAU.

B. A three-axis accelerometer gives accelerating data with the vertical, parallel, and longitudinal axis. The flight data recorder system sensors send data and the position of the flight surfaces and controls to the FDAU.

C. A three-axis accelerometer gives acceleration data along the vertical, lateral, and longitudinal axis. The flight data recorder system sensors send data about the position of the flight surfaces and controls to the FDAU.

A. The removal/installation portion shall state clearly the sequence of steps required to remove and reinstall a component or unit. This portion shall also state precautions to be obeyed.

B. The removal/installation portion shall state clearly the sequence of steps required to remove and reinstall a component or unit. This portion shalln’t include precautions to be obeyed.

C. The removal/installation portion shall hardly state the sequence of steps required to move and reinstall a component or unit. This portion shall also include precautions to be watched.

A. 本部分用于相同的安排方法和识别特定主题材料。

B. 本部分规定了安排和识别某些主题材料的同类方法。

C. 本部分提供了安排和识别特定主题素材的统一方法。

A. 用一些辅助螺栓来暂时安装部件。

B. 用一些附加螺丝固定组件。

C. 用一些辅助螺丝临时组装组件。

A. This module gives good procession from defect.

B. This metal gives good protection from erosion.

C. This material gives good protection from corrosion.