A、 The function and operation of each unit in the system should be described. The location of the units shouldn’t be described.
B、 The function, operation and location of each unit in the system should be deleted.
C、 The function, operation and location of each unit in the system should be described.
答案:C
A、 The function and operation of each unit in the system should be described. The location of the units shouldn’t be described.
B、 The function, operation and location of each unit in the system should be deleted.
C、 The function, operation and location of each unit in the system should be described.
答案:C
A. 如果接头有燃油泄漏,则进行修理。
B. 如果变压器有燃油泄漏,则进行修理。
C. 如果传感器有燃油泄漏,则进行修理。
A. Make sure that the oil in the hydraulic tank is above the minimum lever.
B. Make sure that the fluid in the hydraulic reservoir is above the minimum level.
C. Make sure that the fluid in the fuel reservoir is below the maximum level.
A. 校正空速是指经过位置调整以及仪表调整后的指示空速。
B. 校准空速指修正了仪表误差和位置误差之后得到的指示空速。
C. 校准空速是指调节位置误差以及仪表误差后的指示空速。
A. 紧急停车不包含这些部件。
B. 应急关闭不包括组件本身。
C. 临时关停不包括他们的部门。
A. 当按照指令给活门施加大于设定值的力,活门会反向操作。
B. 当在相反方向上施加压力大于设定值时,它就会工作。
C. 当施加压力操作活门时,用力超过设定值活门反向活动。
A. 保持安静以避免错过信号的声音。
B. 保持安静以避免混淆声音的信号。
C. 保持安静以避免丢失声音信号。
A. 机身制造商将非必要项目作为手册的一部分,要提供选择说明。
B. 包含信息的部分手册,作为对非复杂项目的说明提供给机身制造商。
C. 对于其余非复杂项目,机身制造商将把信息作为手册的一部分。
A. 短距和软地着陆时的正常操作程序
B. 正常操作程序下的短场和软场着陆
C. 短地和软地着陆的正常通告程序
A. Make sure that the parts or surface layer are dry and free from uncontamination.
B. Make sure that the parts or surface layer are dry and free from contamination.
C. Make sure that the parts or surface lamination are dry and free from contamination.
A. A blocked oil jet cannot enhance performance.
B. Incorrect operation is caused by a blocked oil tank.
C. A blocked oil jet can cause incorrect operation.