A、 When some new kind of situation occurs, the operator should communicate openly with the manufacturer. The manufacturer should supply the operator solid assistance.
B、 When the new situation gets worse, it should build the open communication between the operator and manufacturer. The operator claims the situation to get the feedback from the manufacturer.
C、 When something new happens, open interconnection should exist between the manufacturer and the operator. The operator should report to the manufacturer to obtain effective discount.
答案：A
A、 When some new kind of situation occurs, the operator should communicate openly with the manufacturer. The manufacturer should supply the operator solid assistance.
B、 When the new situation gets worse, it should build the open communication between the operator and manufacturer. The operator claims the situation to get the feedback from the manufacturer.
C、 When something new happens, open interconnection should exist between the manufacturer and the operator. The operator should report to the manufacturer to obtain effective discount.
答案：A
A. We advice you not do this procedure in the hangar.
B. We recommend that you do not perform this procedure in the hangar.
C. We are against perform this procedure in the hangar.
A. 发动机功率控制系统可以控制主燃油控制器或调节器，包括涡轮螺旋桨发动机上螺旋桨调速器的控制装置。
B. 发动机功率控制是控制主燃油控制器或协调器装置的系统部分，包括涡桨发动机螺旋桨调节器的控制装置。
C. 发动机功率控制系统提供了一种控制主燃油控制或协调器的方法，包括对涡桨发动机螺旋桨调节器的控制。
A. Loosen the cross nuts [10] on reducer [7] and standby valve [8] on each end of air pressure filter assembly [1].
B. Loosen the swivel nuts [10] on reducer [7] and bypass valve [8] on each end of air pressure filter assembly [1].
C. Loosen the cotter nuts [10] on reducer [7] and bypass valve [8] on each end of air pressure filter assembly [1].
A. If you must apply a strike to open the unit, examine the control linkage.
B. If you must apply an unusual force to open the unit, examine the turnbuckle.
C. If you must apply an unusual force to open the unit, examine the control linkage.
A. 确保P36面板上的“交流已连接”及“未使用”指示灯点亮。
B. 确保交流电已连接，并且P36面板上的“未使用”指示灯处于点亮状态。
C. 确保P36面板上的“交流已连接”指示灯点亮，但其并未使用。
A. Timely check the instruments for accuracy.
B. Instuments shuld be periodically checked for accuracy.
C. Timely check the instruments if it is accurate.
A. Drill the hole until it has a radius of 8.00 +/- 0.003 mm.
B. Ream the hole until it has a diameter of 8.00 +/- 0.003 mm.
C. Trim the hole until it has a width of 8.00 +/- 0.003 mm.
A. 放目录页的桌子必须标识日期但是无需编号。
B. 目录页必须写日期但是不用写数量。
C. 目录页必须注明日期，但无需编号。
A. This system does not supervise the normal channels of communication for this item.
B. This system does not remove the normal channels of communication for this item.
C. This system does not supersede the normal channels of communication for this item.
A. A dash is usually longer than a hyphen but it is sometimes shown as hyphen with a space on each side.
B. A dash is usually longer than a connection symbol but it is sometimes shown as connection symbol with empty on each side.
C. A minus symbol is usually longer than a hyphen but it is sometimes shown as hyphen with a space on each side.
