A、 This Specification is designed to provide guidance for the development of Handbooks for all types of general aviation airplanes. These airplanes are originally certificated at minimum takeoff weights of 12,500 pounds or more.
B、 This specification is intended to provide guidance for the development of Handbooks for all types of general aviation aircraft, which are initially certificated at maximum takeoff weights of 12,500 pounds or less.
C、 This specification is intended to provide guidance for the preparation of Handbooks. For all types of general aviation aircraft, their maximum take-off weight is more than 12,500 pounds.
答案：B
A、 This Specification is designed to provide guidance for the development of Handbooks for all types of general aviation airplanes. These airplanes are originally certificated at minimum takeoff weights of 12,500 pounds or more.
B、 This specification is intended to provide guidance for the development of Handbooks for all types of general aviation aircraft, which are initially certificated at maximum takeoff weights of 12,500 pounds or less.
C、 This specification is intended to provide guidance for the preparation of Handbooks. For all types of general aviation aircraft, their maximum take-off weight is more than 12,500 pounds.
答案：B
A. That section of the systems which controls the position and rotation of the trailing edge flaps.
B. That portion of the systems which controls the position and movement of the trailing edge flaps.
C. That part of the systems which controls the position and rotation of the flaps.
A. 拆下螺栓和止动块。
B. 拆下螺帽和挡板。
C. 拆下螺钉和螺帽。
A. “飞机性能”中的每一项均应对与数据相关的重要条件进行说明。
B. 每一项飞机性能都包含对重要条件和数据的说明。
C. “飞机性能”中的每一条目均应对数据及其重要条件之间的关联性进行说明。
A. 这一系统部分包括控制手柄、电线、电机、警告系统、连接线、控制面、位置指示器等。
B. 这一系统部分包括控制手柄、钢索、丝杠、电机、警告系统、连接装置、操纵面、位置指示器等。
C. 这一系统部分包括控制柄、电缆、千斤顶、电动机、警告系统、连接装置、位置指示灯等。
A. 不要打印标题页的后一页。
B. 不要印在扉页的背面。
C. 不要在标题页后面涂改。
A. 确保通过管路的流体没有气泡。
B. 确保通过管路的油液没有杂质。
C. 确保液压油流经管路没有阻碍。
A. The trim control knob is installed on the control pedestal.
B. The trim control button is mounted under the control pedestal.
C. You can find the trim control button on the control panel.
A. Attach the threading cord to the new cable.
B. Attach the screw＇s cord to the new cable.
C. Attach the screw＇s wire to the new cable.
A. 数据应该被显示为仪表空速和指示空速来保证零误差。
B. 数据应作为标定空速呈现，而不是零机械误差的仪表空速。
C. 假定仪表误差为零，数据应以校正空速和指示空速显示。
A. 确保没有剪断操纵钢索。
B. 确保没有关断控制电源。
C. 确保没有连接控制电缆。
