A reporting system, consistent with the system employed by the ABC Service Organization, has been established and incorporated into this document.

A. 在飞机发动机部分，应描述任一独特的发动机支架，包括减震支架。

B. 描述飞机发动机时，应描述任何独特的发动机整流装置的相关信息，包括减震装置。

C. 描述飞机发动机时，应描述任何独特的发动机安装座的相关信息，包括震动座。

A. 如果轮胎温度升高超过177度，核心机的易熔喷嘴爆破，会爆胎。

B. 如果轮胎温度升高到177度以上，熔断器中心熔化，机轮破损。

C. 如果机轮温度升高到177度以上，易熔塞中心熔化，轮胎会漏气。

A. 给化合物的两部分称重。

B. 提取出复合物的两部分。

C. 分离出混合物的两部分。

A. These instructions are required for towing aircraft in normal or abnormal conditions, such as from soft ground, wet or icy surfaces and in the case of engine is removing or aircraft is damaging.

B. These instructions are necessary for towing the aircraft under normal or abnormal conditions, such as from a wet or icy surface on a soft ground and when the engine is removed or the aircraft is damaged.

C. These instructions are necessary to tow or push the aircraft in normal or abnormal conditions such as towing from soft ground and slippery or icy surfaces, with engines removed, or aircraft damaged.

A. 推荐在手册中添加“非正常程序”部分。

B. 鼓励“异常程序”加入手册中。

C. 鼓励“异常流程”步骤被合并入手册。

A. When the indicator is visible, stop the pump.

B. When the indicator comes on , stop the pump.

C. Stop the pump unless the indicator comes into view.

A. The function of the rules in this specification is to direct the revising of all materials that are contained in Maintenance Manuals prepared by manufacturers.

B. With respect to format, style and method of presenting for all materials which are contained in Maintenance Manuals prepared by manufacturers, you can refer to the rules that are included in this specification.

C. When presenting format, style and method for rules of this specification, all materials of Maintenance Manuals prepared by manufacturers shall be accorded with.

A. Refer to the general information in addition to engine operation limits, guidelines and special procedures.

B. For general information, refer to engine operation limits, guidelines and special procedures.

C. Refer to engine operation limits, guidelines and special procedures besides general information.

A. Compressed air will push contamination into the display unit.

B. The display unit will be contaminated by compressed air.

C. Air pressure will push the dirt into the display unit.

A. A surge tank drain single valve is on the outside fuel tank end rib in main tank 1 and main tank 2.

B. A surge tank drain one way value is on the inboard fuel tank end rib in main tank 1 and main tank 2.

C. A surge tank drain check valve is on the outboard fuel tank end rib in main tank 1 and main tank 2.