A、 描述飞机起落架时,应描述其相应的结构(构件)。
B、 描述飞机起落架时,应描述其建设。
C、 描述飞机起落架时,应描述施工方法。
答案:A
A、 描述飞机起落架时,应描述其相应的结构(构件)。
B、 描述飞机起落架时,应描述其建设。
C、 描述飞机起落架时,应描述施工方法。
答案:A
A. 制造商应在本节中提供一个设备列表,并以单独文件形式附在《飞行员运营手册》中,或作为单独的文件。如果设备列表未包含在本节中,说明其位置。
B. 制造商应提供一份相关设备清单,可以包含在本节中,也可以作为《飞行员操作手册》的附录,也可以作为单独的文件。设备清单未包含在本节中时,应说明其位置。
C. 制造商应在本节中提供一份设备清单,并把《飞行员操作手册》作为单独附件或单独文件。如果装备列表未包含在本节中,说明其方向。
A. Light L4 illuminates within 5 seconds.
B. Light L4 comes on after 5 seconds.
C. Light L4 comes on 5 seconds before.
A. Vigorously scrub the surface with a rough, dry cloth.
B. Polish the surface with a soft, damp cloth.
C. Rub the surface quickly with a soft, dry cloth.
A. RESET测试电门用于减少故障历史。当VERFIY(通过)和绿色GO灯亮时, 按下RESET(复位)电门。
B. RESET测试电门用于转移故障记录。当VERFIY(验证)和绿色GO灯打开时, 按下RESET(复位)电门。
C. RESET测试电门用于消除故障记录。当VERFIY(确认)和绿色GO灯亮时, 按下RESET(复位)电门。
A. A number in the bottom left corner of the display means a related page.
B. A number in the top left corner of the display refers to a related page.
C. A number in the top left corner of the display is the irrelevant page.
A. A surge tank drain single valve is on the outside fuel tank end rib in main tank 1 and main tank 2.
B. A surge tank drain one way value is on the inboard fuel tank end rib in main tank 1 and main tank 2.
C. A surge tank drain check valve is on the outboard fuel tank end rib in main tank 1 and main tank 2.
A. Any anomaly should be reported to ABC, through the Condition Reporting System, so that additions and/or revisions can be made to the CAP where deemed necessary.
B. Report any abnormality to ABC by the Condition Reporting System to verify supplement and/or revisions needed as necessary to the CAP.
C. ABC shall receive the anomalies report from the Condition Reporting System for CAP to add and/or revise as necessary.
A. 设置电门到位置2以得到正确的值。
B. 为获得正确的值,请将卡扣拔到2的位置。
C. 将把手切换到2的位置以获取正确的数值。
A. Procedures contain tasks that give instructions on how to perform them.
B. Procedures contain general instructions that show you how to do tasks.
C. Procedures contain instructions that tell you how to do a task.
A. 如果滤子在极短的时间堵塞,送到实验室进行污染分析。
B. 如果滤子使用期间出现异常,请对污染物进行适当的检测。
C. 实验室污染分析用于防止滤子在短时间内堵塞。