A、 如果杆被意外移动,请跳过测试。
B、 如果手柄意外移动,再做一次测试。
C、 如果重新测试,确保手柄不会意外移动。
答案:B
A、 如果杆被意外移动,请跳过测试。
B、 如果手柄意外移动,再做一次测试。
C、 如果重新测试,确保手柄不会意外移动。
答案:B
A. Elevator move is limited by the move of the elevator power control units.
B. Elevator trip is limited by the move of the elevator power control units.
C. Elevator travel is limited by the stroke of the elevator power control units.
A. 描述飞机飞行控制系统时,应说明任何交叉连接设置。
B. 描述飞机飞行控制系统时,应说明任何互联装置。
C. 描述飞机飞行控制系统时,应说明任何内部连接设置。
A. The gyroscope will become stable before less than 15 seconds.
B. The gyroscope will become stable for at least 15 seconds.
C. After about 15 seconds, the gyroscope will become stable.
A. List the part numbers in numbers.
B. Make a list of the part in digital numbers.
C. Make a list of the part numbers in numerical sequence.
A. 对于利用空气作为防冰介质的涡轮类动力装置,发动机防冰功能包含在空气系统中。
B. 因为涡轮类型动力组合使用气体作为防止积冰的渠道,发动机防积冰设备被储存在空气系统下。
C. 因为涡轮动力装置将空气用来防止积冰,发动机防冰包含在通风系统中。
A. The positive pressure relief valves are fail safe devices. If the aft outflow valve cann’t be closed, these positive pressure relief valves bleed fuselage pressure overboard.
B. The positive pressure relief valves are fail safe devices. If the positive pressure relief valves fails closed, these aft outflow valve bleed fuselage pressure overboard.
C. The positive pressure relief valves are fail safe devices. If the aft outflow valve fails closed, these positive pressure relief valves bleed fuselage pressure overboard.
A. Exterior Placards and Markings are required for ground servicing instructions, inspections, cautions, warnings.
B. Exterior Labels and Markings are required for ground servicing instructions, inspections, cautions, warnings.
C. Exterior Placards and Markings are required for ground servicing instructions, inspections, warnings, cautions.
A. 检查机身蒙皮盖板的底部有无裂纹。
B. 检查底部蒙皮盖板和机身有无裂纹。
C. 检查机身底部蒙皮盖板有无裂纹。
A. 防火密封是安装在动力装置上或动力装置周围的耐火隔断或耐火密封,目的是隔离着火区域。
B. 防火密封是根据着火类别而安装在动力装置或动力装置周围的耐火隔板或耐火密封件,以隔离着火区域。
C. 防火密封指那些安装在动力装置或动力装置周围部件上的防火部件和密封材料,它们能在失火时隔离相关区域。
A. 电线代码由电路功能代码、电线编号、电线段字母和电线尺寸组成。通常会添加后缀,表示地线(N)、相位(A、B等)或热电偶材料(铝镁合金等)。
B. 电线代码由电路功能代码、电线编号、电线段字母和电线尺寸组成。通常会添加后缀,表示接地(N)、阶段(A、B等)或热敏电门材料(铝镁合金等)。
C. 电线代码由电路功能代码、电线编号、电线段字母和电线尺寸组成。通常会添加后缀,表示地线(N)、相位(A、B等)或热敏电门材料(铝镁合金等)。