Supply containers of sufficient capacity and diameter.

A. When simulating altitude, make sure you have alternate ATC transponders in active mode.

B. Make sure that the ATC transponders are in standby mode when you simulate altitude.

C. It is optional to keep the ATC transponders in ready mode during altitude simulation.

A. Ground Control depicts minimum diameter of turning for taxiing and ground operation.

B. Ground Control describes minimum radius of turn for taxiing and ground handling.

C. The least radius of turn for taxiing and ground maneuver is described in Ground Control.

A. 第22章讲的是提供自动控制飞机飞行手段的组件和部件。包括控制方向、航向、姿态、高度和速度的组件和部件。

B. 第22章讲的是提供自动控制飞机飞行手段的组件和部件。包括控制方向、航迹、高度、姿态和速度的组件和部件。

C. 第22章讲的是提供自动控制飞机飞行手段的组件和部件。包括控制方向、航迹、姿态、高度和速度的组件和部件。

A. Do not apply too much composite on the blanket.

B. Do not apply too much adhesive on the gasket.

C. Do not apply too much compound on the gasket.

A. Adjust the lever intentionally and reset the system to the neutral position.

B. Move the lever before setting the system to the neutral position again.

C. In case of an inadvertent lever movement, return the system to the neutral position again.

A. Explain when there is any change to the weight or force distance of the airplane, how to keep this record so as to acquire right starting data by calculating the weight and c.g. during normal operation of the airplane.

B. Explain how to maintain this record when changes to the weight or moments of the airplane are made so that accurate starting data is available to calculate the weight and c. g. during normal operation of the airplane.

C. In order to get correct starting data during abnormal operation of the airplane, the weight and c. g. should be calculated and explain how to keep this record when there are changes to the weight or moments of airplane.

A. ASD感谢所有对本规范做出整理的组织、公司和个人。

B. ASD感谢所有对本规范做出贡献的组织、公司和个人。

C. ASD感谢所有对本特例做出解释的组织、公司和个人。

A. 飞机的内部装饰板包括检修盖板和填充板。

B. 蒙皮覆盖机身外表面，包括接近门和加强件。

C. 飞机的蒙皮包括舱门和倍增器。

A. Sudden changes in temperature can adjust the internal logic.

B. The internal logic adjusts to sudden changes in temperature.

C. The internal logic can be adjusted by sudden changes in temperature.

A. 设置电门到位置2以得到正确的值。

B. 为获得正确的值，请将卡扣拔到2的位置。

C. 将把手切换到2的位置以获取正确的数值。