A、 To make sure that ATC transceivers are in standby mode, you must simulate altitude, otherwise false TCAS signals may occur intermittently.
B、 Make sure the ATC transmitters are in standby mode, or false TCAS targets may occur accidentally due to altitude simulation.
C、 Make sure that the ATC transponders are in standby mode when you simulate altitude. You can accidentally cause false TCAS targets.
答案：C
A、 To make sure that ATC transceivers are in standby mode, you must simulate altitude, otherwise false TCAS signals may occur intermittently.
B、 Make sure the ATC transmitters are in standby mode, or false TCAS targets may occur accidentally due to altitude simulation.
C、 Make sure that the ATC transponders are in standby mode when you simulate altitude. You can accidentally cause false TCAS targets.
答案：C
A. Ensure that there is no corrosion on the tubes.
B. Make sure that the tubes have no deformation.
C. Make sure that the tubes have no crack.
A. 该程序应明确，在演示或训练识别一发不工作时的VMCA时，应从不小于VSSE的速度开始逐渐减速（约1节/秒），直至速度减小至VMCA或失速警告触发，以先到者为准。
B. 该程序应规定，为了演示或培训有意使一台发动机不工作的VMCA，应从VSSE速度开始逐渐降低速度（大约每秒1节），直到VMCA或失速警告，以先到者为准。
C. 该程序应规定，为了证明或训练VMCA的识别，故意使一台发动机不工作将速度从VSSE或以上逐渐降低（大约每秒1节），直到获得VMCA或失速警告（以先发生的为准）。
A. The function of the rules in this specification is to direct the revising of all materials that are contained in Maintenance Manuals prepared by manufacturers.
B. With respect to format, style and method of presenting for all materials which are contained in Maintenance Manuals prepared by manufacturers, you can refer to the rules that are included in this specification.
C. When presenting format, style and method for rules of this specification, all materials of Maintenance Manuals prepared by manufacturers shall be accorded with.
A. 微处理器卡可以更换。
B. 微处理器卡可以互换。
C. 微处理器卡可以改变。
A. Too much force can cause damage to the sealing components.
B. Excessive force may damage the seal.
C. Too much force can cause damage to the contact surface.
A. 飞机的五大结构包括机身，机翼，副翼，升降舵和起落架．
B. 飞机包括五个主要结构单元，它们是机身，机翼，安定面，飞行操纵舵面和起落架．
C. 飞机主要有五个结构部分，它们是机头，机翼，副翼，升降舵和起落架．
A. 用干净的棉布浸湿水后清除除污剂。
B. 用清水浸湿并清洗带有洗涤剂的干净棉布。
C. 用干净的棉布清除污渍，再用清水洗涤。
A. 特殊尺寸应显示在图形中。
B. 详细尺寸应显示在图纸上。
C. 主要尺寸应显示在图纸上。
A. This section includes all the fuel consumption information for the pilot to use during the flight and landing.
B. In this section, the pilot can find the recommending fuel saving information to use during takeoff and flight.
C. The recommended fuel conservation information shall be integrated into this section to show the pilot how to minimize the fuel usage during the operation of the airplane.
A. Thus, whether the manual be a maintenance manual or a wiring diagram manual for a large airplane or a small airplane, the person wishing information concerning the indicating portion of the fuel system would refer to the Tab Chapter 28, Fuel.
B. Therefore, those hoping to obtain information about the fuel system instructions section of the repair manual or circuit diagram manual for both large and small aircraft may correspond to the label, chapter 28, Fuel.
C. As a result, regardless of the aircraft type (large or small), the person who wants to get display section information of the fuel system in the servicing manual or line diagram manual may search the tag, chapter 28, Fuel.
