A、 With the aid of the component manufacturer, all components in this chapter can be overhauled in any workshops with different qualifications.
B、 Without the data supplied by the component manufacturer, it is possible for the most qualified shop to overhaul any components included in this chapter.
C、 You must overhaul any or all components in this chapter in an eligible shop on the basis of data provided by the component manufacturer.
答案:C
A、 With the aid of the component manufacturer, all components in this chapter can be overhauled in any workshops with different qualifications.
B、 Without the data supplied by the component manufacturer, it is possible for the most qualified shop to overhaul any components included in this chapter.
C、 You must overhaul any or all components in this chapter in an eligible shop on the basis of data provided by the component manufacturer.
答案:C
A. If the wheel temperature reaches as high as 177 deg., the core of safety plug shears off and the tire slips.
B. If the wheel temperature increases to more than 177 deg., the core of the fusible plug melts and the tire deflates.
C. The core of the filter element melts once the wheel temperature is above 177 deg., causing the tire to deflate.
A. 转弯协调器感知并指示横滚和偏航的速度。转弯协调器中陀螺的转子向上倾斜30°。此时,它不仅响应纵轴上的运动,而且响应立轴上的滚动运动。
B. 转弯倾斜器感知并指示横滚和偏航率。转弯倾斜器中陀螺的转子向上倾斜30°。此时,它不仅响应立轴上的运动,而且响应纵轴上的滚动运动。
C. 转弯协调器感知并指示横滚和偏航率。转弯协调器中陀螺的转子向上倾斜30度。因此它不仅响应立轴上的运动,而且响应纵轴上的滚动运动。
A. 用钝刮刀去除密封胶。
B. 用尖锥去除密封剂。
C. 用塑料刮刀去除封圈。
A. Do not apply too much composite on the blanket.
B. Do not apply too much adhesive on the gasket.
C. Do not apply too much compound on the gasket.
A. According to instrument error and compressibility effects, Outside Air Temperature is corrected.
B. Outside Air Temperature is set to avoid instrument error and compressibility effects.
C. Due to instrument error and compressibility effects, Outside Air Temperature is modified.
A. It is understood that compliance with the above can in some instances cause duplication of test procedures, which is acceptable.
B. It will lead to repeat the test process when you obey the regulations in some cases, it is barely to be accepted.
C. It is understood that follow the above regulations may cause repeating in the test procedures , although it is allowable.
A. The cover title shall be "Pilot's Operating Handbook" or "Pilot's Operating Handbook and FAA Approved Airplane Flight Manual".
B. The topic cover shall be "Pilot's Controlling Manual" or "Pilot's Controlling Manual and FAA Accepted Airplane Flight Manual".
C. The page topic shall be "Pilot's Managing Handbook" or "Pilot's Managing Handbook and FAA Authorized Airplane Flight Manual".
A. Make sure that the scale is not more than 400 knots.
B. Make sure that the indication is not more than 400 knots.
C. Make sure that the indication is not more than 400 miles.
A. In flight deck, once you set probe heater switches on the overhead panel automatically, all the heater lights flash.
B. Make sure probe heater switches on the overhead panel in flight deck are in AUTO position and all the heater lights illuminate.
C. Set probe heater switches on the overhead panel in cockpit in AUTO position so that all the heater lights come into view.
A. “禁止踩踏”区域或可通往翼、身油箱的路线必须表记出来并加以必要的警示信息。在有些飞机上,用黑色点带标示出“禁止踩踏”区域。英文或双语标记的位置使得从前面或后面靠近飞机时都可以读到这些标记。
B. “没有台阶”区域或不可通往翼、身油箱的路线必须表记出来并加以必要的警示信息。在有些飞机上,用黑色点带标示出“没有台阶”区域。英文或双语标记的位置使得从前面或后面靠近飞机时都可以读到这些标记。
C. “禁止踩踏”区域或不可通往翼、身油箱的路线必须表记出来并加以必要的警示信息。在有些飞机上,用黑色点带标示出“禁止踩踏”区域。英文或双语标记的位置使得从前面或后面靠近飞机时都可以读到这些标记。