A、 “站点”是一个距参考基准面某个距离的位置。
B、 “站位”指沿飞机机身的位置,以到基准面的距离来表示。
C、 “站位”是飞机机翼上的一个位置,用与参考基准面的距离表示。
答案:B
A、 “站点”是一个距参考基准面某个距离的位置。
B、 “站位”指沿飞机机身的位置,以到基准面的距离来表示。
C、 “站位”是飞机机翼上的一个位置,用与参考基准面的距离表示。
答案:B
A. 不要拧松螺母使其对准。
B. 不要拧紧螺母使其对齐。
C. 不要松动螺栓使其对准。
A. 你可以对这些条款使用备用替换。
B. 你可以对这些条款使用不同的替代。
C. 你可以对这些条款使用等效的替代。
A. 试验结果表明,需要实施故障识别程序。
B. 如果测试没有给出满意的结果,执行故障隔离程序。
C. 如果测试结果不满足,启动故障探测程序。
A. 给凸起的固定环和堵塞指示器打保险。
B. 给滚花固定环和堵塞指示器本体打保险。
C. 给带凸边的密封环安装保险丝,以固定指示器本体。
A. 描述飞机发动机时,应简要描述以下附件的相关信息: 1.滑油泵 2.燃油泵 3.液压泵 4.气源泵 5.转速表 6.扭矩计 7.电源 8.螺旋桨同步器 9.排气温度探头
B. 描述飞机发动机时,应简要描述以下附件的相关信息: 1.燃油泵 2.煤油泵 3.液压泵 4.气泵 5.转速表 6.扭力计 7.电源 8.螺旋桨同步器 9.排气温度探头
C. 描述飞机发动机时,应简要描述以下附件的相关信息: 1.滑油泵 2.燃油泵 3.液压泵 4.气泵 5.速度表 6.扭力计 7.电源 8.螺旋桨同步器 9.排气温度探头
A. In some cases, wires are color coded and these should be shown on the wiring diagram.
B. In some cases, wires are color coded and these should be installed on the wiring diagram.
C. In some cases, wires are color coded and these should be explained on the wiring diagram.
A. Do a tire pressure check, and if necessary inflate the tires.
B. Check the pressure of a wheel and charge it if necessary.
C. Inspect the tire pressure and it's required to refuel.
A. Stringers and the upper wing skin are called vent channels. The vent channels go through drain float valves in the center tank.
B. Stringers and the upper wing skin are compose of the vent channels. The vent channels got exhaust float valves from the center tank.
C. Stringers and the upper wing skin make the vent channels. The vent channels have drain float valves in the center tank.
A. Caution notes regarding possible hazards of using authorized and unauthorized cleaning agents shall be included.
B. Caution notes regarding use of unauthorized cleaning agents and possible hazards of using authorized ones shall be included.
C. Caution notes regarding use of authorized cleaning agents and possible hazards of use of unauthorized ones shall be included.
A. Clean the surface to make sure that the sealing is satisfactory.
B. Clean surfaces to ensure the bonding as required.
C. Clean the surface to make sure that the bond is satisfactory.