A、 机身上固定位置安装的门,包括结构件、闩锁机构、把手、衬板等。
B、 在机身内的固定分隔板上装置的门。包括结构件、锁紧机构、手柄、内衬等物品。
C、 安装在机身内固定隔板上的门。包括结构件、抛锁机构、把手、内衬等组成部分。
答案:B
A、 机身上固定位置安装的门,包括结构件、闩锁机构、把手、衬板等。
B、 在机身内的固定分隔板上装置的门。包括结构件、锁紧机构、手柄、内衬等物品。
C、 安装在机身内固定隔板上的门。包括结构件、抛锁机构、把手、内衬等组成部分。
答案:B
A. 确保设备测量值与燃油箱的实际油量一致。
B. 确保表显数值与油箱加油量一致。
C. 确保仪表指示与油箱油量一致。
A. 使用听筒侧面的按钮来调节音量。
B. 使用手机旁边的按键来适应体积。
C. 为了加大容量,使用手机侧面的旋钮。
A. 来自压气机的空气与来自燃油喷嘴的燃油在燃烧室混合。
B. 从压气机出来的空气和燃油在燃烧室混合。
C. 从压气机出来的空气和从燃油喷嘴出来的燃油在燃烧室燃烧。
A. In STE, a unit started with "topic sentence" is to instruct the main topic.
B. The "topic sentence" starts to tell the readers the topic of the paragraph in STE.
C. In STE, a paragraph starts with a “topic sentence” which tells the reader what the topic of that paragraph is.
A. The rules containing in this specification shall provide a guide to the formatting, type and method of all present documents in the manufacturer's maintenance manual.
B. The rules in this specification are served as a guide for the format, style and way of representation for all materials contained in manufacturer's maintenance manual.
C. The rules contained in this specification shall serve as guides for format, style and method of presentation for all material included in maintenance manuals prepared by manufacturers.
A. 这一系统部分包括控制手柄、钢索、作动筒、告警系统、连接装置、操纵面、位置指示器等部件。
B. 这一系统部分包括控制手柄、电线、作动筒、告警系统、连接装置、操纵面、位置指示器等部件。
C. 这一系统部分包括控制杆、电缆、作动筒、告警系统、连动装置、操纵面、位置指示灯等部件。
A. Make sure that the movement limits of the flight control surfaces are free.
B. Make sure that the travel ranges of the flight control surfaces are clear.
C. Make sure that the travel limits of the flight control rudders are clean.
A. 格式和排版由CAP编写者决定,要认识到其格式和排版最好与编写者现有文件相似。
B. 格式和排版由CAP生产者提议,其批准需经过与现有文件格式和排版的对比。
C. 格式和排版由CAP生产者定义,并预期与现有的文件格式和排版保持一致。
A. The wing tanks and the center tank have the same rate of supply of fuel.
B. The rate of supply of fuel from the wing tanks to the center tank is equal.
C. The fuel supply rate from all wing tanks and the center tank is the same.
A. 系统设计确保两个交流电源不能依次供应动力给同样的转接汇流条。
B. 系统设计确保两个交流电源不能先后供应动力给同样的转接汇流条。
C. 系统设计确保两个交流电源不能同时供应动力给同样的转换汇流条。