A、 气缸盖、排气(涡轮进口)温度等能通过发动机温度系统显示。
B、 发动机温度系统包括气缸盖、排气(涡轮进口)等,用于显示发动机温度。
C、 发动机温度系统用于指示发动机不同位置的温度,包括气缸盖温度、排气(涡轮进口)温度等。
答案:C
A、 气缸盖、排气(涡轮进口)温度等能通过发动机温度系统显示。
B、 发动机温度系统包括气缸盖、排气(涡轮进口)等,用于显示发动机温度。
C、 发动机温度系统用于指示发动机不同位置的温度,包括气缸盖温度、排气(涡轮进口)温度等。
答案:C
A. Assess the requirements of washers.
B. Evaluate the amount of clamps required.
C. Calculate the number of shims that are necessary.
A. This program is not available at present.
B. This procedure is not applicable at this time.
C. This program is not reasonable now.
A. The needle moves horizontally along the gage.
B. The pointer moves vertically along the scale.
C. The indicator moves longitudinally along the edge.
A. Make an estimate of the necessary quantity.
B. Evaluate on the quantity available.
C. Approximate the scale of the quality.
A. Apply two kindreds of protective compound to shield the sealant from any harm caused by hydraulic fluid.
B. In order to prevent damage to the sealant from hydraulic fluid, it is necessary to apply two layers of protective compound.
C. To prevent hydraulic fluid from drowning the sealant, it is recommended to apply two layers of protective compound.
A. 当飞机制造商选定的最大持续功率大于发动机型号数据单上的额定最大持续功率的时候,飞机型号数据单内列出来的最大持续功率表明是遵循了相应适航标准,同时这个数值也会呈现在《飞行员操作手册》中。
B. 当飞机制造商选定的最大连续功率小于发动机型号数据单上的额定最大连续功率时,飞机型号数据单内所列出的最大连续功率用以表明对相应适航标准的符合性,并应在《飞行员操作手册》中载明。
C. 当飞机制造商选定的最大持续功率小于发动机型号数据单上的额定最大持续功率的时候,发动机型号数据单内列出来的最大持续功率表明是遵循了相应适航标准,同时这个数值也会呈现在《飞行员操作手册》中。
A. The cover title shall be "Pilot's Operating Handbook" or "Polit's Operating Handbook and FAA Approved Airplane Flight Manual."
B. The name of the book might be "Pilot's Operating Handbook" or "FAA Approved Airplane Flight Manual."
C. The cover could be named as "Pilot's Operation Instruction" or "Pilot's Operation Instruction and FAA Approved Airplane Flight Instruction."
A. Maximum Limiting speed Unsticks is the speed restrain which will not be intentionally surpassed in typical flight operations. V is communicated in knots and M in Mach Number.
B. Maximum Restriction Speed is the fastest a plane can fly without breaking the rules in normal flight. The speed is measured in knots and Mach Number.
C. Maximum Operating Limit Speed is the speed limit that may not be deliberately exceeded in normal flight operations. V is expressed in knots and M in Mach Number.
A. Crucial angle of attack is the angle at which a stream or air flow begins to split from a surface,causing a decrease in efficiency. It is important for designing dynamic surfaces ,such as airplane wings,turbine blades,as it determines the maximum attack angle that can be achieved without causing loss of lift or thrust.
B. Crutial angle of attack is the angle at which a stream or air flow begins to seperate from a surface,causing a decrease in efficiency. It is important for designing aerodynamic surfaces ,such as airplane airfoils,turbine blades,as it determines the maximum attack angle that can be achieved without causing loss of lift or thrust.
C. Critical angle of attack is the angle at which a fluid or air flow begins to separate from a surface, causing a reduction in the efficiency of the flow. The critical attack angle is an important consideration in the design of aerodynamic surfaces, such as airplane wings, turbine blades, as it determines the maximum angle of attack that can be achieved without causing a loss of lift or propulsion.
A. 供气系统被多个子系统共用,能够为水箱加压以确保流体的流动。
B. 空气供应系统是某一个子系统独用的部分,其作用是为供应罐加压以确保流体流动。
C. 空气供应系统是多个子系统共用的部分,其作用是为供应罐减压以延缓流体流动。