A、 点火部分包括感应振荡器、磁电机、开关、主过滤器、分配器、线束、火花塞、点火继电器、激励器和提前点火的电气部分。
B、 点火部分包括感应振动器、磁电机、开关、铅过滤器、分配器、线束、插头、和火花提前的电气部分。
C、 点火部分包括感应振动器、开关、铅过滤器、分配器、线束、插头、点火继电器、激励器和火花提前的电气部分。
答案:A
A、 点火部分包括感应振荡器、磁电机、开关、主过滤器、分配器、线束、火花塞、点火继电器、激励器和提前点火的电气部分。
B、 点火部分包括感应振动器、磁电机、开关、铅过滤器、分配器、线束、插头、和火花提前的电气部分。
C、 点火部分包括感应振动器、开关、铅过滤器、分配器、线束、插头、点火继电器、激励器和火花提前的电气部分。
答案:A
A. 文件必须经常修订。
B. 文件必须易于修订。
C. 文件必须容易阅读和看见。
A. 副翼回到中立位后,确保它们与襟翼齐平。
B. 副翼回到初始位后,确保它们与缝翼垂直。
C. 襟翼移动到中立位后,确保它们与缝翼齐平。
A. It is not recommended that we remove the damage prior to submitting information to Boeing,such as dents on metallic and composite structures, and delamination or punctures to composite structure.
B. If the removal of dents on metallic and composite structures, and delamination or punctures to composite structure is approved by SRM,CMM,or SB,it is preferable to remove the damage prior to submitting information to Boeing.
C. It is recommended that we remove the damage prior to submitting information to Boeing,such as dents on metallic and composite structures, and delamination or punctures to composite structure.
A. 用直尺和塞尺测量划痕的深度。
B. 用直边的卡尺测量凹坑的深度。
C. 用直尺和塞尺测量凹坑的深度。
A. 防腐可能有很多原因。
B. 腐蚀可能有很多原因。
C. 腐蚀可能有很多防腐措施。
A. 当飞机在地面上时支撑飞机机头的那部分系统,包括减震支柱、阻力支柱、门、连接装置、固定螺栓等。
B. 当飞机在地面上时支撑飞机机头的那部分系统。包括刹车、浮子、门、轮胎、固定螺栓等。
C. 当飞机在地面上时支撑飞机机头的那部分系统。包括驱动机构、转向架饰件、门、跳板、上下门闩等。
A. Only the certified personnel can complete the modification or repair to the aircraft.
B. Pay attention that inspections or maintenance work ought to be carried out by mechanics.
C. Modifications or repairs to aircraft should be achieved by releasing staff.
A. 对相对简单的部件可能不需要描述和操作说明、和/或排故信息。
B. 对简单部件不需要描述就可以操作和/或排故。
C. 对相对容易的部件可以不需要描述和操作,只需要排故信息。
A. Because pressurized air can blow contamination away from the display unit, you should not use it to clean the holes behind the display unit in order to avoid damaging the equipment.
B. Do not use compressed air to clean the holes on the rear of the display unit. Compressed air will push contamination into the display unit. This can cause damage to the equipment.
C. Do not use compressed air to clean the holes behind the display unit, because it can blow contaminants into display unit which may be damaged.
A. The gears will automatically engage if a malfunction occurs.
B. If there is proper functioning, the gears will automatically engage.
C. If there is a malfunction, the gears will automatically disengage.