If the shear pin breaks, do an inspection of the towbar.

A. 仔细评估损伤区域。

B. 仔细测量损伤区域。

C. 仔细评估磨损区域。

A. 表中给出了尺寸。

B. 表在桌子上。

C. 尺寸在图中显示。

A. Each surge tank has a vent scoop and pressure relief valve on its access door.

B. The vent scoop and pressure relief valve each has an access door in the surge tank.

C. The surge tank has a vent scoop and pressure relief valve on each access door.

A. If an annunciator panel TRANSIT light fails to illuminate while the corresponding device is in motion, then this light must be considered inoperative.

B. When related device is in operation and if annunciator panel TRANSIT light comes on, so this light does not work.

C. The light is considered to be available if the annunciator panel TRANSIT light goes off when the related device is in motion.

A. 如果维护消息未在"电流状态"中显示，则出现了连续性故障。

B. 如果维护信息未在"当前状态"中显示，则出现了间歇性故障。

C. 如果维护消息未在"当前状态"中显示，则出现了次级故障。

A. Direct Damage is defined as follows: 1) Metallic surfaces are burned, melted or show signs of metal distortion. 2) Non-metallic surfaces are burned, punctured or delaminated.

B. Direct Damage is defined as follows: 1) Metallic surfaces are burned, combined or show signs of metal corrosion. 2) Non-metallic surfaces are burned, punctured or contaminated.

C. Direct Damage is defined as follows: 1) Metallic surfaces are burned, synthesised or show signs of metal distortion. 2) Non-metallic surfaces are burned, cut or delaminated.

A. Functional test is the determination that a system or component performs the required procedures in all respects in accordance with the minimum acceptable system or component design specifications.

B. Functional test is that procedure required to ascertain that a system or unit is functioning in all aspects in accordance with minimum acceptable system or unit design specifications.

C. Functional testing is the procedure requested to determine that a system or component operates in all respects according to the minimum unsanctioned system or component design specification.

A. 航段是航线的一部分，它的两端可以是一个地理位置或一个无线电定位点。

B. 航段是航路的一部分。航路的两端分别由地理位置或一个明确的无线电站点来确定。

C. 航段即航路的一部分，起点和终点通常是一个地理位置或是一个固定的的无线电台定位点。

A. 只要一个词同时符合技术名词和技术动词的规范，该词既可以是技术名称，也可以是技术动词。

B. 同一个词可以既是技术动词也是技术名词，只要你能够在技术名词列表或者技术动词列表中找到它。

C. 如果同一个词归入技术名称类别也可以归入技术动词类别，那么该词既可以是技术名词，也可以是技术动词。

A. Accelerate Stop Distance is the distance required to accelerate an airplane to a specified speed and, assuming failure of an engine at the instant that speed is attained, to bring the airplane to a stop.

B. Accelerated stop distance refers to the distance required to promote an aircraft to a stipulated speed, assuming that engine failed occurs at that speed and the aircraft stops flying.

C. Accelerating stop distance is defined as the distance requiring to speed up an aircraft to a specific speed, assuming that engine failed at that speed and the aircraft stops flying.