A、 Put a plug on the open end of each pipe.
B、 On the opening of each pipe, put a cover.
C、 Put a cover on the loose end of the pipe.
答案:A
A、 Put a plug on the open end of each pipe.
B、 On the opening of each pipe, put a cover.
C、 Put a cover on the loose end of the pipe.
答案:A
A. 前外机身勤务门止动点缺失。
B. 前外机身勤务门止动点失效。
C. 前外机身勤务门止动点凸起。
A. A hard landing may be the result of shock loading of the engine.
B. Shock loading of an engine may result in a heavy landing.
C. A heavy landing can cause shock loading of the engine.
A. Use a filter to remove unwanted material from the oil.
B. Use a strainer to remove unused substances from the fluid.
C. Use a strainer to filter unnecessary material from the lubrication liquid.
A. 为了减少分配误差,推荐使用该方法,同时将系统和设备的功能特性告知所有者。
B. 为使辨别时产生的误差最小化,推荐使用该方法,同时对所有者说明系统和设备的使用方式。
C. 建议采用该方法,以最大程度地减少分配出错,同时使所有者获知系统和设备的可用性。
A. The air temperature outside the aircraft refers to the atmospheric air dynamic temperature.
B. Outside air temperature is the free air static temperature.
C. The flowing air effects the ambient air temperature.
A. That portion of the system is used to indicate the quantity, temperature and pressure of the oil.
B. That portion of the system is used to indicate the quality, temperature and pressure of the oil.
C. That portion of the system is used to indicate the quantity, temperature and pressure of the fuel.
A. 用温水浸泡该区域。
B. 用温水冲洗该区域。
C. 用温水清洗该区域。
A. Solenoid switches shall indicate whether the valve is solenoid-loaded to the open or closed positon.
B. Electromagnetic valves shall include a marking indicating whether the valve is coil-loaded to the open or closed positon.
C. Solenoid valves shall include a notation indicating whether the valve is spring-loaded to the open or closed positon.
A. 当飞机在地面上时支撑飞机机头的那部分系统,包括减震支柱、阻力支柱、门、连接装置、固定螺栓等。
B. 当飞机在地面上时支撑飞机机头的那部分系统。包括刹车、浮子、门、轮胎、固定螺栓等。
C. 当飞机在地面上时支撑飞机机头的那部分系统。包括驱动机构、转向架饰件、门、跳板、上下门闩等。
A. 用于把液压油储存到一定量后运送于系统中使用的部分。包括很多部件,比如:油箱、储存器、阀门、油泵、杠杆、电门、电缆、铺设管路、外部连接器等。不包括将阀门提供给使用中的系统。
B. 用来储存和运送液压油到各个使用系统的系统部分,包括油箱、蓄压器、活门、油泵、手柄、电门、钢索、管路、外部接头等部件。不包括各用户系统的供应阀。
C. 系统用于把液压油储存并运送于系统中进行使用的部分。包括以下部件:油箱、储存器、阀门、油泵、手柄,开关、电缆、铺设管路,外部连接器等。不包括输送阀门给系统使用。