A、 The paper must include a three-looking picture of the unit.
B、 The report must inclue a three- view drawing of the unit.
C、 The diagram must include a three-side drawing of the unit.
答案:B
A、 The paper must include a three-looking picture of the unit.
B、 The report must inclue a three- view drawing of the unit.
C、 The diagram must include a three-side drawing of the unit.
答案:B
A. 如果你不能轻易地安装开口销,增大杆的长度。
B. 如果你不能轻易地安装校装销,调整杆的长度。
C. 如果你不能轻易地安装开口销,调节杆的尺寸。
A. 为防止外来物摩擦,对表面抛光。
B. 为防止不必要的磨损,对表面进行打磨修理。
C. 对表面进行抛光以防止不必要的磨损。
A. 确报开关的保护盖已经盖好。
B. 确保舱门上装有保险系统。
C. 查看开关是否安装了保险。
A. Fill the outer tank before you fill the inner tank.
B. Fill the inner tank before you fill the outer tank.
C. Fill the inboard tank before you drain the overboard tank.
A. 笔记本电脑有以下主要部件
B. 笔记本电脑有以下初级部件
C. 笔记本电脑有以下仿制部件
A. Make sure that the oil in the hydraulic tank is above the minimum lever.
B. Make sure that the fluid in the hydraulic reservoir is above the minimum level.
C. Make sure that the fluid in the fuel reservoir is below the maximum level.
A. The manufacturer may choose to include information on Unscheduled Maintenance Checks, including Time Limits/Inspections and Maintenance Checks, in a separate manual. Reference points must be listed in the maintenance manual.
B. For Unscheduled Maintenance Checks, the manufacturer will have the choice to separate the information of Time Limits/Inspections and Maintenance Checks in manuals. The manual can be the Maintenance Manual.
C. The information on Unscheduled Maintenance Checks should be provided in the Maintenance Manual including Time Limits/Inspections and Maintenance Checks. Whether to include these information in an other manual is at the manufacturer's option.
A. 包括永磁电机和分配器之间的接线,在这些系统中,它们不是单独的单元。
B. 包括发电机和分配器之间的接线,在这些系统中,它们是单独的单元。
C. 包括磁电机和分电器之间的接线,在这些系统中,它们是单独的单元。
A. Make sure that you can see the oil level through the sight gauge.
B. Make sure that the oil quantity is shown on the oil level indicator.
C. You can read the oil level on the oil level gauge.
A. This procedure is only applicable to type A parts.
B. This task is only used for type A parts.
C. This procedure is applicable to all type parts.