A、 Write the instructions in the mandatory mode.
B、 Write the instructions in the imperative form.
C、 Write the instructions in the active mode.
答案:B
A、 Write the instructions in the mandatory mode.
B、 Write the instructions in the imperative form.
C、 Write the instructions in the active mode.
答案:B
A. 有24片宽弦钛合金风扇叶片。
B. 有24片宽弦合金钢风扇叶片。
C. 有弦宽为24的钛合金风扇叶片。
A. 应注意起落架和控制舵面锁定机构,最小转弯半径,前起落架最大牵引负载等注意事项和限制。
B. 起落架和控制舵面锁的使用、最小转弯半径、前起落架最大牵引负载等预防措施和限制信息应引起重视。
C. 应重视注意事项和限制信息,例如起落架和控制舵面锁的使用、最小转弯半径、前起落架最大推拖负载等。
A. 检查时间将根据一些问题进行调整。
B. 针对严重问题将调整检查次数。
C. 针对严重问题将延长检查时间。
A. Propeller governor is a device that adjusts the speed of the engine or propeller by increasing or decreasing the clearance of the propeller through the clearance changing mechanism on the propeller hub.
B. Propeller governor is the device that regulates the rpm of the engine or propeller by increasing or decreasing the propeller pitch, through a pitch change mechanism in the propeller hub.
C. Propeller governor is through the propeller hub of the propeller pitch changing machine, adjusts the speed of the propeller or engine by increasing or decreasing the propeller gap.
A. STE对技术翻译来说是毫无意义的。
B. STE对技术翻译来说是宝贵的支持。
C. STE是对技术文件理解的宝贵支持。
A. Put the bell crank and shaft with identification to prevent improper installation.
B. Identify the bell crank and shaft with marks to prevent wrong installation.
C. Put the bell crank and shaft with identification to prevent wrong installation.
A. 对仅使用涡轮驱动的飞机,应提供对动力装置部件的温度和高度限制的说明。
B. 仅针对以涡轮螺旋桨为动力的飞机,应提供动力装置部件和发动机流体的标定温度和相应的高度限制。
C. 对涡轮增压的飞机,要提供其动力装置部件和发动机液体的说明。
A. The values must be less than the approved differences.
B. The values must not exceed the allowable differences.
C. The values must be less than the allowable differences.
A. Make the necessary repairs during the next applied spot check.
B. Make the required repairs during the next applicable preliminary inspection.
C. Make the necessary repairs during the next applicable scheduled maintenance.
A. 格式和布局应由CAP编写者决定,且应与CAP编写者现有文件的格式和布局相似。
B. CAP编写者决定格式和排版,并认可与编写者现有文件格式类似的格式和排版。
C. 确认与CAP编写者的现有文件相似后,由CAP编写者批准确定表格和设计。