A、 Clamps should be spaced at intervals not exceeding 24 inches. Clamps on wire bundles should be selected so that they have a snug fit without pinching wires.
B、 Pins should be spaced at intervals not exceeding 24 inches. Pins on harness should be selected so that they have a snug fit without pinching wires.
C、 Pins should be spaced at intervals not exceeding 24 inches. Pins on harness should be selected so that they have a snug fit without scratching wires.
答案:A
A、 Clamps should be spaced at intervals not exceeding 24 inches. Clamps on wire bundles should be selected so that they have a snug fit without pinching wires.
B、 Pins should be spaced at intervals not exceeding 24 inches. Pins on harness should be selected so that they have a snug fit without pinching wires.
C、 Pins should be spaced at intervals not exceeding 24 inches. Pins on harness should be selected so that they have a snug fit without scratching wires.
答案:A
A. 确保轴承安装正确。
B. 确保部件安装正确。
C. 确保齿轮是正确的安装。
A. Make sure that there is a different distance between the holes.
B. Make sure that you space the holes equally.
C. The holes should have long distances.
A. 解除离合器可以防止启动发动机时发生意外。
B. 在启动发动机之前,脱开离合器。
C. 拆卸离合器,启动发动机。
A. 在最宽处测量裂纹的宽度。
B. 在最宽处测量凹坑的宽度。
C. 在最宽处测量刮痕的宽度。
A. A mixture of fuel and oxygen can cause an explosion.
B. A mixture of fuel and nitrogen can cause an burn.
C. A mixture of gas and oxygen should cause an explosion.
A. "Towing and Taxiing" shall include procedures to be used such as ground turning techniques, use of parking brakes, connection of electrical power, etc..
B. "Towing and Taxiing" shall include procedures to be used such as ground steering techniques, use of chocks, connection of electrical power, etc..
C. "Towing and Taxiing" shall include procedures to be used such as ground turning techniques, use of brakes, connection of electrical power, etc..
A. 显示连接点的位置,转弯半径的图解应包括在内。
B. 附着点的位置和转弯半径应包括插图。
C. 插图显示连接点的位置还包括转弯半径。
A. Engine Operating Limits include Limits for Take off Power, Maximum Continuous Power, and Maximum Cruising Power.
B. Engine Operating Limits include limits for Take off Thrust, Maximum Cruise Power, and Maximum Normal Operating Power.
C. Engine Operating Limits include limits for Take off Power, Maximum Continuous Power, and Maximum Normal Operating Power.
A. 如果填充剂粘在工具上,用冷水湿润工具。
B. 如果使用工具时需用封圈辅助,用冷水先清洗工具。
C. 如果需要使用填充剂粘接工具,用冷水浸泡工具。
A. 解释如何避免和注意燃油消耗。
B. 解释如何避免和注意燃油污染。
C. 解释如何避免和注意燃油泄漏。