A、 Replace the No. 1 and No. 2 computers. Then do the test again.
B、 Interchange the No. 1 and No. 2 computers. Then do the test again.
C、 Repair the No. 1 and No. 2 computers. Then do the test again.
答案：B
A、 Replace the No. 1 and No. 2 computers. Then do the test again.
B、 Interchange the No. 1 and No. 2 computers. Then do the test again.
C、 Repair the No. 1 and No. 2 computers. Then do the test again.
答案：B
A. If the two indications do not agree, do the test again.
B. If there is a conflict between the two indications, repeat the test.
C. If the two indicators show any conflict, repeat the test.
A. 不要超过这个速度或马赫数，但当空气平稳时仅仅小心操作就足够了。
B. 除非在平稳的空气中谨慎操作，否则不得超过此速度或马赫数。
C. 不要超过这个马赫数的速度，除非接受警戒只在平稳的空气中操作。
A. 油屑监测器用于监控除油系统中黑色金属和有色金属屑的大小和质量。
B. 磁屑探测器用于探测排油系统中含铁和不含铁金属的尺寸和数量。
C. 油屑探测器用于检测回油系统中黑色金属和有色金属的尺寸和数量。
A. 子段落和其从属信息，如图表列表，会显示在本部分的内容清单中。
B. 在本部分的目录中会展示次段落的相应信息，譬如数据列表。
C. 分段和其它相关信息，例如图表清单，可在本节的目录中显示。
A. However, manufacturers are following the same fundamental systems and sequence of subject arrangements even if some systems, which are not available, may be bypassed.
B. Nevertheless, each manufacturer is expected to follow the same sequence of basic system and subject arrangements even though some systems may be omitted when not applicable.
C. Even so, all manufacturers are expected to submit to the same arrangements of main systems and subject sequences even though certain systems would be ignored when not applicable.
A. If there is sufficient friction to keep it in position, adjust the clamp.
B. Adjust the clip until there is sufficient friction to keep it in position.
C. Adjust the clamp until there is sufficient friction to keep it in position.
A. Inspect the drain holes for obstruction.
B. Check for the drain holes for abrasion.
C. Check the drain holes for leakage.
A. 拆除所有阻止操纵舵面自由移动的校装销和设备。
B. 拆下所有的插钉和设备使操纵舵面自由移动。
C. 拆下所有的开口销，并移走防止操纵舵面自由移动的设备。
A. Unscheduled maintenance checks are those maintenance checks and inspections on the aircraft, its systems and units which are recognized by the manufacturer as special or unusual conditions which are not related to the time limits specified in -10 above.
B. For the unscheduled maintenance checks and inspections of aircraft, aircraft systems and components, the manufacturer shall not include special or unusual conditions from the time limits specified in -10.
C. If the unscheduled maintenance checks and inspections on the aircraft, its systems and units are special or unusual conditions, the time limits specified in -10 shall be referred to by the manufacturer＇s.
A. 分步执行这两个步骤。
B. 依次执行这两个程序。
C. 同时做这两个步骤。
