A、 Preset the control to get maximum thrust.
B、 Set the control to get maximum thrust.
C、 Reset the control to get the maximum force .
答案:B
A、 Preset the control to get maximum thrust.
B、 Set the control to get maximum thrust.
C、 Reset the control to get the maximum force .
答案:B
A. 故障隔离手册提供的信息可以用来标识、定位和纠正可能在飞机上发生的任何故障。
B. 故障隔离手册提供信息用于标识、定位和修正已经在飞机上发生的任何故障的信息。
C. 飞机上出现的任何故障信息都可以参照故障隔离手册提供的标识来定位并排故。
A. 这种物质在高浓度时是有毒的。
B. 在高度浓缩后,这种材料会有毒。
C. 这种材料在高温下会易燃。
A. 不要拧松螺母使其对准。
B. 不要拧紧螺母使其对齐。
C. 不要松动螺栓使其对准。
A. 如果使用一个公司出版样式的手册,那么手册的格式和布局应当遵循本规范。
B. 如果一个公司出版的手册被使用,那么该手册的格式和布局即纳入规范的要求。
C. 如果一个公司使用了按自己的样式出版的手册,那么手册的格式和布局须遵循本规范。
A. See the graphics for information of the solenoid valves which shall contain a note indicating the position of the valve (whether spring-loaded to its open or closed position).
B. Solenoid valves indicated on the schematic shall have a notation indicating when the valve shall be spring-loaded to the open or closed position.
C. Solenoid valves shall be indicated on the schematic and shall include a notation indicating whether the valve is spring-loaded to the open or closed position.
A. 格式和布局应由CAP编写者决定,且应与CAP编写者现有文件的格式和布局相似。
B. CAP编写者决定格式和排版,并认可与编写者现有文件格式类似的格式和排版。
C. 确认与CAP编写者的现有文件相似后,由CAP编写者批准确定表格和设计。
A. 残留在零件上的溶剂会导致腐蚀。
B. 残留在零件上的油液会导致腐蚀。
C. 残留在零件上的溶剂会导致穿孔。
A. Warning is an operating procedure, inspection , repair or maintenance practice , which if not correctly followed, could result in personal injury , or loss of life.
B. You should obey the warning in an operation procedure, check, repair or maintenance practice, otherwise person injury or death will happen.
C. Warning in an operation procedure, inspection , repair or maintenance practice should be followed seriously, whereas may involve in personal injury , or loss of life .
A. 在描述飞机行李舱时,应给出装载提示。
B. 在描述飞机行李舱时,应给出压力提示。
C. 在描述飞机行李舱时,应给出加载提示。
A. 不需要使用支架或梯子就能实现在地面做检查。
B. 无需使用支架或梯子就能完成地面检查。
C. 检查是在地面上完成的,不需要使用架子或梯子。