A、 The seat shall be lifted to leave the track locked.
B、 Lift the seat until it is away from the track locks.
C、 Eject the seat until it is isolated from the track locks.
答案：B
A、 The seat shall be lifted to leave the track locked.
B、 Lift the seat until it is away from the track locks.
C、 Eject the seat until it is isolated from the track locks.
答案：B
A. Two systems can be energized at a time.
B. Two systems can be engaged at the same time.
C. Two systems can be adopted separately.
A. Make sure that the coils of the oxygen hose do not rub together.
B. It is acceptable the coils of the chlorine hose rub together.
C. Ensure that the coils of the nitrogen hose do not rub together.
A. NOTE: The manufacturer may have the option of including wiring schematic in Chapter 24, Chapter 91, or establish a separate Wiring Diagram Manual.
B. NOTE: The manufacturer may have the option of including wiring schematic in Chapter 24, Chapter 91, or establish a separate Wiring Schematic Manual.
C. NOTE: The manufacturer may have the option of including wiring diagrams in Chapter 24, Chapter 91, or establish a separate Wiring Diagram Manual.
A. If the airplane has not been tested for twirl characteristics and recovery methods, a discussion shall be included on the limited conditions for preventing spins and the possible best recovery techniques, and it shall be stated that no testing has been conducted and that the recovery techniques are based on the manufacturer＇s best comment.
B. If the airplane has not been tested for spin characteristics and recovery methods, a discussion of prevention of spins and probable best recovery techniques will be included with a notation that no tests were made and the recovery techniques are based on the best judgment of the manufacturer.
C. If the aircraft has not been expanded for spin features and recovery ways, prevention of spin and possible best recovery techniques are discussed and it is determined that no exams have been performed and that recovery techniques are based on the manufacturer＇s best judgment.
A. These airworthiness directives provide detailed information about continued airworthiness requirements for the manufacturer and owner/operator.
B. These service bulletins provide detailed information regarding continued airworthiness requirements for the manufacturer and owner/operator.
C. These advisory circulars provide specific information regarding continued airworthiness requirements for the manufacturer and owner/operator.
A. Give precise instructions for using emergency exits.
B. Give special directions for using urgent exits.
C. Give accurate data for using urgent exits.
A. 拧松螺钉，但同时不要给它们打力矩。
B. 拧紧螺栓，但此时不要扭矩它们。
C. 拧紧螺母，但此时不要给它们打力矩。
A. When preparing dangerous goods, follow the operational instructions.
B. Before you use dangerous materials, obey these precautions.
C. Prior to applying any hazardous material, understand the principles of it.
A. 确保L和R PACK开关在P5-10空调面板上显示OFF位。
B. 确保P5-10空调面板上的L和R PACK开关处于OFF位置。
C. 确保P5-10面板上的L和R PACK在OFF位时，空调按钮在关闭位。
A. 描述飞机机翼襟翼、俯冲制动或扰流板系统时，应描述其应用如何影响俯仰姿态、空速、配平和失速速度。
B. 描述飞机机翼翼尖、俯冲制动或扰流板系统时，应描述其应用如何影响俯仰姿态、表速、配平和失速速度。
C. 描述飞机机翼襟翼、俯冲减速板或扰流板系统时，应描述各自工作时如何影响俯仰姿势、空速、配平和失速速度。
