A、 To gain entry to the nearby structure, take out the sensor.
B、 Remove the sensor to get access to the adjacent structure.
C、 Disassemble the sensor to get access to the adjacent structure.
答案:B
A、 To gain entry to the nearby structure, take out the sensor.
B、 Remove the sensor to get access to the adjacent structure.
C、 Disassemble the sensor to get access to the adjacent structure.
答案:B
A. 此说明帮助您找到相关的适用STE规则和不同特定主题。
B. 此索引帮助您找到与不同特定主题相关的适用STE规则。
C. 此指数可以帮助您找到不同于特定主题相关的适用STE规则。
A. The manufacturer shall prepare all text in either one or two columns with justification at his own discretion , but, two columns are preferable for readability.
B. Manufacturers shall prepare all text both in one and two columns separately; however, two columns are better for reading.
C. According to the manufacturer' explanations, all text shall be prepared in one or two columns; however, two columns have better visual effect.
A. If slats are detected during this procedure, the operator must do the repair in some flight hours depending on the slats depth.
B. If cracks are detected during this procedure, the operator must do the repair in some flight hours depending on the crack length.
C. If scratches are detected during this procedure, the owner must do the repair in some flight hours depending on the scratches length.
A. 当火警启动时,温度增加并引起灭火器工作。
B. 当火焰开始时,温度增加并造成触发器工作。
C. 当起火时,温度升高并使探测器工作。
A. 起落架是用来封闭起落架舱门的结构。如果门是作为一个整体结构,那么其内容可以仅在第32章中写出。
B. 起落架是门的结构,收起时被封闭在起落架舱内。如果门被做成一个完整结构,它们可以仅在第32章显示。
C. 起落架是门的结构,被用于装进起落架舱内。如果门是一个完整结构,它们可以仅在第32章展示。
A. 始终保持液晶显示器在最大亮度。
B. 在液晶显示器上,最大限度保持亮度是可控的。
C. 始终保持液晶显示器的亮度处于最小状态。
A. The equipment refrigeration system exchanges the key equipment cabinets and the equipment in the compartment.
B. The equipment cooling system removes heat from the equipment in the main equipment center and the flight compartment.
C. The equipment exchange system removes heat from the lower equipment center and the aft cargo compartment.
A. Take the oxygen mask in a hurry to start the flow of oxygen.
B. Pull the oxygen mask with a sudden movement to start the flow of oxygen.
C. Pull the oxygen mask in a must to start the flow of oxygen.
A. Collect all maintenance records for the part PNxxxx.
B. Compile all maintenance logs for the component PNxxxx.
C. Collect all flight logs for the component PNxxxx.
A. Visual difference is acceptable between the previous surface and the new surface.
B. There should be no visual difference between the initial surface finish and the new surface finish.
C. It is forbidden to have acoustic difference between the former surface finish and the new surface finish.