如果胎压特别高，打开活门。

A. When a capital letter or a symbol is used for a unit of measurement, you should take it and the number before it as a word.

B. When used in measurement, the acronym or the symbol and the related number should be taken as a word.

C. When you write an abbreviation or a symbol for a unit of measurement, count it and the preceding number as one word.

A. 然而，“紧急情况”几乎总是涉及需要立即快速响应的故障，例如总动力装置故障、火警或烟雾或客舱快速失压。

B. 然而，“紧急程序”几乎总是波及到需要立即和快速反应的故障，例如发动机故障、火灾或烟雾，以及机舱快速释压等。

C. 然而，全动力装置故障、火警烟雾或座舱快速失压，这些几乎总是涉及需要立即快速响应的故障属于“应急状况”。

A. 文件应该经常修订。

B. 文件应该易于修订。

C. 文件必须容易理解。

A. “重大的检查条件”用于描述裂纹检查时的最小尺寸以及其他检查条件时的磨损极限、腐蚀坑深度等。

B. “重大的检查项目”用于描述裂纹检查时可检测到的最小裂纹尺寸以及其他检查项，如磨损极限、腐蚀坑深度等。

C. “重大的检查状况”用于描述裂纹检查中预期发现的最小尺寸。对于其他检查条件，指定磨损极限和腐蚀坑深度等

A. 确保装置底部的两个接线板接合。

B. 确保装置底部的两个插口接合。

C. 确保装置底部的两个接线板接通。

A. 确保束缚杆没有与安装在地板上的逃离滑梯支架啮合。

B. 确保束缚杆没有装在地板上的逃离滑梯支架上。

C. 确保束缚杆没有与在地板上的逃离滑梯支架对齐。

A. 左大翼二号油箱盖板断裂。

B. 左大翼二号油箱接近门变形。

C. 左大翼二号油箱入口门脱落。

A. Transport the part to the overhaul shop.

B. Transport the part to the maintenance shop.

C. Remove the part to the overhaul shop.

A. This Section shall be clearly stated and cross-referenced to the proper paragraph in Section 2 of the Handbook which consists of limitations.

B. This Section contains limitations which shall be clearly stated and cross-referenced to the proper paragraph in Section 2 of the Handbook.

C. The proper paragraph in Section 2 of the Handbook shall describe and cross-reference this Section included in this limitations.

A. The component was damaged badly, the repairing cost is over 60% of the total price. The workshop suggests reporting as an unserviceable part.

B. The component was damaged heavily; the repairing cost is over 60% of the total price. The workshop suggests scrapping.

C. The component was destroyed heavily; the repairing cost is 60% of the total price. The workshop suggests segregation.