A、 The engine and all additional facilities use indifferent lubricants.
B、 The engine uses multiple types of lubricants for different purposes.
C、 The engine and all auxiliary equipment use the same lubricant.
答案:C
A、 The engine and all additional facilities use indifferent lubricants.
B、 The engine uses multiple types of lubricants for different purposes.
C、 The engine and all auxiliary equipment use the same lubricant.
答案:C
A. If the clearance dimension is not accurate, adjust the clearance dimension between the extend proximity sensor [44A] and the target [45]. Some of the ducts in the air distribution system are wrapped with insulation material.
B. Adjust the clearance dimension between the extend proximity sensor [44A] and the target [45] in case of the clearance dimension is out of tolerance. Some of the ducts in the air distribution system are wrapped with non-conductive material .
C. Adjust the clearance dimension between the extend proximity sensor [44A] and the target [45] until the clearance dimension is out of range. Some of the ducts in the air distribution system are wrapped with compound material.
A. Push the applicable button to eject the disk drive.
B. Press the applicable key to pop out the tape actuator.
C. Compress the applicable button to jet the disk actuator.
A. 运营人可以使用标准的ABC“状况报告表”或包含相同信息的同等表格。
B. 运营人可使用ABC公司标准的“状况报告表”或其他等效表格。
C. 飞行员可以使用标准的ABC“条件报告表”或包含相同信息的同等表格。
A. 综合模式接收机(MMR)将全部位置系统、时间和日期传送到正、副驾驶员时钟。
B. 多模式接收机(MMR)将全球定位系统时间和日期传送到正、副驾驶员时钟。
C. 多个模块接收机(MMR)发送卫星定位系统时间和日期传送到正、副驾驶员时钟。
A. 任何关于最大乘客座位的规定,例如对乘客数量或座位占用特别要求,都应给予说明。
B. 任何对最大乘客座位数量的规定都应声明,是按照乘客人数规定,或是按照座位占用特别规定。
C. 针对最大乘客座位数量的任何限制都应加以说明,包括乘客人数或座位占用的具体限制。
A. Visually check the forward engine mount to the fan frame bolts if they are correctly installed and damaged.
B. Do a visual check of the bolts which attach the forward engine mount to the fan frame for the correct installation and damage.
C. Visually check the correct installation and damage of the forward engine mount to the fan frame bolts.
A. 做步骤1到4以确保没有剪切载荷施加到端头上。
B. 做步骤1到4以确保没有径向载荷施加到轴上。
C. 做步骤1到4以确保没有轴向载荷施加到杆上。
A. 撰写《飞行员操作手册》本节内容时,制造商对飞机的描述应能够最大程度地便利目标飞行员群体了解信息,因此可以不遵循本节中的段落顺序和内容安排。
B. 《飞行员操作手册》本节应以制造商认为对最有可能操作飞机的飞行员以最有帮助的方式来描述飞机。手册应遵循本节中的段落顺序和详细信息。
C. 《飞行员操作手册》本节应以制造商认为对最有可能操作飞机的飞行员最有帮助的方式来描述飞机。手册不得遵循本节中的段落顺序和详细信息。
A. 飞机的维护信息必须与制造商提供的最近信息一致。
B. 飞机可根据制造商发布的最新信息进行维修。
C. 根据厂家最近出版的维修信息对飞机进行修理。
A. 确保L和R PACK开关在P5-10空调面板上显示OFF位。
B. 确保P5-10空调面板上的L和R PACK开关处于OFF位置。
C. 确保P5-10面板上的L和R PACK在OFF位时,空调按钮在关闭位。