A、 A blocked oil jet cannot enhance performance.
B、 Incorrect operation is caused by a blocked oil tank.
C、 A blocked oil jet can cause incorrect operation.
答案:C
A、 A blocked oil jet cannot enhance performance.
B、 Incorrect operation is caused by a blocked oil tank.
C、 A blocked oil jet can cause incorrect operation.
答案:C
A. Make sure there is no leakage of hydraulic fluid at the router.
B. Make sure there is no leakage of hydraulic fluid at the transducer.
C. Make sure there is no leakage of hydraulic fluid at the transponder.
A. 向前旋转手柄。
B. 向后移动水平面。
C. 向后移动手柄。
A. 在APU运转过程中,如出现滑油渗漏,检查滑油温度传感器。
B. 在APU运转过程中,检查滑油温度传感器的滑油渗漏程度。
C. 在APU运转过程中,检查滑油温度传感器有无滑油渗漏迹象。
A. 电子舱有隔热毯、消音层、维修灯、冷却电气电子设备和相关组件的设备架。
B. 电子舱有隔热毯、消音层、维修灯、由空气冷却的电气电子设备和相关组件的设备架。
C. 电子舱有绝缘层、维修灯、由空气冷却的电气电子设备和相关组件的设备架。
A. You can adjust the volume control.
B. You can adjust the value control.
C. You can override the voice control.
A. “修理/改装”用于描述修理或改装说明,也可指向其他文件中的标准修理或其他地方定义的特殊修理或改装,如在服务包、服务通告等中。
B. “修理/改装”用于描述修理或改装指令,也可指向其他文件中的标准修理或其他文件(如服务包或服务通告等)中界定的特殊修理或改装。
C. “修理/改装”用于描述维修或改装说明,可能指另一份文件中的标准维修或其他地方定义的特殊维修或改装,如维修包、维修公告等。
A. Drill the hole until it has a radius of 8.00 +/- 0.003 mm.
B. Ream the hole until it has a diameter of 8.00 +/- 0.003 mm.
C. Trim the hole until it has a width of 8.00 +/- 0.003 mm.
A. Make sure that you can see the oil level through the sight gauge.
B. Make sure that the oil quantity is shown on the oil level indicator.
C. You can read the oil level on the oil level gauge.
A. 在工作区入口处设置安全屏障。
B. 在工作区域放置安全电源。
C. 放置安全屏障在入口通道的位置。
A. 仅B747刚引进时期,每个月就有4000页必须从手册中删减或增加进手册。
B. 在B747引进时期,仅每个月必须替换或增补的手册就有4000页以上。
C. 在B747刚引进的阶段,仅一个月就需要更换或增加约4000页到手册中。