A、 用于把液压油储存到一定量后运送于系统中使用的部分。包括很多部件,比如:油箱、储存器、阀门、油泵、杠杆、电门、电缆、铺设管路、外部连接器等。不包括将阀门提供给使用中的系统。
B、 用来储存和运送液压油到各个使用系统的系统部分,包括油箱、蓄压器、活门、油泵、手柄、电门、钢索、管路、外部接头等部件。不包括各用户系统的供应阀。
C、 系统用于把液压油储存并运送于系统中进行使用的部分。包括以下部件:油箱、储存器、阀门、油泵、手柄,开关、电缆、铺设管路,外部连接器等。不包括输送阀门给系统使用。
答案:B
A、 用于把液压油储存到一定量后运送于系统中使用的部分。包括很多部件,比如:油箱、储存器、阀门、油泵、杠杆、电门、电缆、铺设管路、外部连接器等。不包括将阀门提供给使用中的系统。
B、 用来储存和运送液压油到各个使用系统的系统部分,包括油箱、蓄压器、活门、油泵、手柄、电门、钢索、管路、外部接头等部件。不包括各用户系统的供应阀。
C、 系统用于把液压油储存并运送于系统中进行使用的部分。包括以下部件:油箱、储存器、阀门、油泵、手柄,开关、电缆、铺设管路,外部连接器等。不包括输送阀门给系统使用。
答案:B
A. Ignore the absence of contamination in the fuel sample and continue with the procedure.
B. Continue with the procedure if the fuel sample does not exhibit any contamination.
C. Proceed with the procedure regardless of any contamination found in the fuel sample.
A. 将容器置于排放活门下方。
B. 将排放活门置于油箱下方。
C. 将容器从排放活门下方移开。
A. CRES causes magnesium, aluminum, or cadmium to corrode when it touches these metals.
B. Stainless steel corrodes once touching magnesium, aluminum, or chromium metals.
C. Magnesium, aluminum, or chromium metals shall be protected from the corrosion caused by CRES.
A. 衡量硅酸吸收水分需要的时间。
B. 测量硅胶吸收水分所需的时间。
C. 计算硅钢片浇注成形的时间。
A. 如果有必要,增加更多垫片。
B. 增加更多气源是有必要的。
C. 如有必要,添加更多汽油。
A. 刮痕的最大长度为5英寸。
B. 裂缝的最大长度为5英寸。
C. 刮痕的最大长度为5英尺。
A. If the valve is the source of the fuel leak, discard the valve seals and install new ones.
B. If the fuel leaks out of the valve, reinstall the valve seals.
C. If the fuel leak flows towards the valve, discard the valve seals and install new ones.
A. Disconnect the connection. This connection is downstream of the valve.
B. Disconnect the connection. The valve is downstream of the connection.
C. Disconnect the valve. The valve is downstream of the connection.
A. Operational Tags need to be listed or made a legend.
B. Operating Placards shall be listed or illustrated.
C. Operation Instructions have to be listed or mapped out.
A. "Towing and Taxiing" shall include procedures to be used such as ground turning techniques, use of parking brakes, connection of electrical power, etc..
B. "Towing and Taxiing" shall include procedures to be used such as ground steering techniques, use of chocks, connection of electrical power, etc..
C. "Towing and Taxiing" shall include procedures to be used such as ground turning techniques, use of brakes, connection of electrical power, etc..