The minimum jack closed height must be less than the distance between the fitting and the ground when the aircraft is on its wheels.

A. 逆时针转动调节器60度。

B. 逆时针旋转调节器时应当增加60度。

C. 逆时针旋转调节器，每次增量60度。

A. 将这些部分按概率顺序列在每个故障下面。

B. 根据可能的指令在每个问题中列出这些部分。

C. 将这些部分在潜在订单的问题中列举出来。

A. The table is referred to follow the applicable torque values.

B. The applicable torque values are used to obey the table.

C. See the table below for the applicable torque values.

A. 它应包含进行验证试验所需的所有信息，以将系统或组件稳定性保持在可接受水平，无需参考其他附加文件。

B. 它应包含所有重要的信息来执行功能测试，以使系统或组件性能保持在可接受水平，无需参考其他附加文件。

C. 为了使系统或组件性能保持在正常水平，而不参考其他附加文件，它应包含执行验证试验所需的所有信息。

A. The tune time for a frequency not in memory is 2 to 4 seconds typical, 7 seconds maximum.

B. The adjust time for a frequency not in memory is 2 to 4 seconds typical, 7 seconds maximum.

C. The tune time for a frequency not in memory is 2 to 4 seconds common, 7 seconds maximum.

A. Correct operation of the parts does not allow dents to occur.

B. Dents that have an influence on the correct operation of the parts are not allowed.

C. Dents can prevent correct operation of the parts, so they are not permitted.

A. 涂料足够柔软，用塑料铲子将其去除。

B. 涂料足够柔软，用塑料楔子将其去除。

C. 涂料足够柔软，用胶铲子将其去除。

A. Sudden changes in temperature can adjust the internal logic.

B. The internal logic adjusts to sudden changes in temperature.

C. The internal logic can be adjusted by sudden changes in temperature.

A. Handbooks shall be ready to revise in accordance with the specification.

B. In accordance with the specification, manuals should be easy to revise.

C. Handbooks have been already revised, according to the specification.

A. 描述飞机加热、通风、除霜和空调系统时，应说明如何使用所提供的操纵系统获得最大效益。

B. 描述飞机加热、通风、除霜和空调系统时，应说明如何使用所提供的控制装置使这些系统能够获得最大效益。

C. 描述飞机加热、通风、除霜和空调系统时，应说明如何获得最大收益以便使用所提供的控制装置。