A、 Detection is that portion of the fire protection system which is used to sense and indicate the presence of overheat, smoke, or fire, if furnished as manufacturer-designated standard equipment.
B、 If specified as standard equipment by the manufacturer, such equipment is that portion of the fire protection system. Detection equipment includes systems for transmitting and indicating conditions of overheating, smoke or fire.
C、 If the equipment is part of a fire protection system and is designated as standard equipment by the manufacturer, the detection equipment includes the sensing and indication of overheat, smoke or fire.
答案：A
A、 Detection is that portion of the fire protection system which is used to sense and indicate the presence of overheat, smoke, or fire, if furnished as manufacturer-designated standard equipment.
B、 If specified as standard equipment by the manufacturer, such equipment is that portion of the fire protection system. Detection equipment includes systems for transmitting and indicating conditions of overheating, smoke or fire.
C、 If the equipment is part of a fire protection system and is designated as standard equipment by the manufacturer, the detection equipment includes the sensing and indication of overheat, smoke or fire.
答案：A
A. This system does not include the usual channels of communication available to CAP.
B. This system does not supersede the normal channels of communication for items not covered by the CAP.
C. The usual channels of communication in this system cannot be replaced by the introduction of CAP.
A. Clamps should be spaced at intervals not exceeding 24 inches. Clamps on wire bundles should be selected so that they have a snug fit without pinching wires.
B. Pins should be spaced at intervals not exceeding 24 inches. Pins on harness should be selected so that they have a snug fit without pinching wires.
C. Pins should be spaced at intervals not exceeding 24 inches. Pins on harness should be selected so that they have a snug fit without scratching wires.
A. Obtain approval from the design authority after making any changes to this repair procedure.
B. Prior to modifying this repair procedure, obtain the approval of the design authority.
C. Ensure that the design authority approves nonessential alterations made to this repair procedure.
A. 如果活门过早开启，停止测试。
B. 如果活门已经开启，停止测试。
C. 如果活门的开启时机未到，停止测试。
A. 隔离引起故障的部分。
B. 隔离部件产生了故障。
C. 引起故障的部分已经被隔离。
A. 能够在紧急情况下改善操作安全性的要求和所推荐的空速(以及适用该空速的飞机配置)可被列在本节开头或列在《应急程序检查单》中。
B. 应在本节开头或《应急程序检查单》中列出，在紧急情况下能够避免事故的所需和建议的空速（以及适用于这些空速的飞机构型）。
C. 所需空速以及被认为可以在紧急情况下提高操作安全性的推荐空速(和对应的飞机构型)应在本节一开始就列出，或包含在《应急程序检查单》中。
A. 在任何时候，你都可以调整启动顺序。
B. 你可以停止启动程序任意次数。
C. 在任何时候，你都可以停止启动程序。
A. Smooth the cargo-compartment door levers.
B. Polish the cargo-compartment door wheels.
C. Lubricate the cargo-compartment door handles.
A. Magnetic tools have an unwanted effect on the compass system.
B. Metallic tools are of positive effect on the compass system.
C. Magnets can affect the compass system adversely.
A. Sudden changes in temperature can adjust the internal logic.
B. The internal logic adjusts to sudden changes in temperature.
C. The internal logic can be adjusted by sudden changes in temperature.
