A、 Any anomaly should be reported to ABC, through the Condition Reporting System, so that additions and/or revisions can be made to the CAP where deemed necessary.
B、 Report any abnormality to ABC by the Condition Reporting System to verify supplement and/or revisions needed as necessary to the CAP.
C、 ABC shall receive the anomalies report from the Condition Reporting System for CAP to add and/or revise as necessary.
答案:A
A、 Any anomaly should be reported to ABC, through the Condition Reporting System, so that additions and/or revisions can be made to the CAP where deemed necessary.
B、 Report any abnormality to ABC by the Condition Reporting System to verify supplement and/or revisions needed as necessary to the CAP.
C、 ABC shall receive the anomalies report from the Condition Reporting System for CAP to add and/or revise as necessary.
答案:A
A. Do not authorize to do the engine test.
B. The engine test will not be completed if you are not authorized.
C. If you are not approved to do this work, do not do this engine test.
A. Examine the seal for defects.
B. Check the abnormality of the sealant.
C. Inspect whether there are the defaults in the solvent.
A. 剪切销断裂时,确保拖杆完整。
B. 如果剪切销断裂,检查拖杆。
C. 检查拖杆对剪切销断裂的影响。
A. Overhaul of any components covered in this chapter shall be completed in accordance with data other than those provided by the manufacturer.
B. None of the components covered by this chapter shall be overhauled except in accordance with the manufacturer's data.
C. All components covered in this chapter must be overhauled according to the technical data provided by the manufacturer.
A. It is necessary to generally check these areas.
B. It is imperative to regularly inspect these areas.
C. Frequent inspection of these areas is necessary.
A. That section of the systems which controls the position and rotation of the trailing edge flaps.
B. That portion of the systems which controls the position and movement of the trailing edge flaps.
C. That part of the systems which controls the position and rotation of the flaps.
A. Bleed the hydraulic system.
B. Pressurize the hydraulic system.
C. Depressurize the hydraulic system.
A. 很多滑油的回油滤都内置旁通活门。当滤芯堵住时旁通活门打开,使得滑油从旁路流过。
B. 很多液压油的回油滤都内置旁通活门。当滤芯堵住时旁通活门打开,使得油液从旁路流过。
C. 很多滑油的回油滤都内置旁通活门。当滤芯故障时旁通活门打开,使得滑油从旁路流过。
A. 任何关于限制,仪表标识或者指示牌的改变,会在飞行操作手册的基本限制(第二部分)被说明。
B. 任意改变极限,仪表标记或者指示牌的基本限制应该在飞行员操作手册中规定。
C. 对飞行员操作手册基本限制(第二部分)中的限制、仪表标志或标牌的任何变更均应予以说明。
A. Remove the bolt, washer, and nut to disconnect the bend clamp from the structure.
B. Remove the screw, washer, and nut to disconnect the short clamp from the structure.
C. Remove the screw, washer, and nut to disconnect the loop clamp from the structure.