A、 When the movement of input rod is ranged from 5 to 10 mm, measure the piston retraction.
B、 When the input lever is between 5 and 10 mm, measure the piston extension.
C、 When the interval of input shaft changes between 5 and 10 mm, measure the expansion of the piston.
答案:B
A、 When the movement of input rod is ranged from 5 to 10 mm, measure the piston retraction.
B、 When the input lever is between 5 and 10 mm, measure the piston extension.
C、 When the interval of input shaft changes between 5 and 10 mm, measure the expansion of the piston.
答案:B
A. Find the type and dimensions of the damage.
B. Locate the damage and its dimensions.
C. Designate the damage type and then give it a dimension.
A. "Maintenance Practices" include servicing, removal/installation, adjustment/test, inspection/check, cleaning/painting, and approved repairs. "Maintenance Practices" should obey the instructions of the Troubleshooting Section.
B. "Maintenance Practices" include servicing, removal/installation, adjustment/test, inspection/check, cleaning/painting, and approved repairs. "Maintenance Practices" should be located after the Troubleshooting Section.
C. "Maintenance Practices" include servicing, removal/installation, adjustment/test, inspection/check, cleaning/painting. And approved repairs should be located after the Troubleshooting Section.
A. The instructions for taxing in bad weather conditions are found in chapter 6.
B. Chapter 6 provides instructions on pulling up in normal weather conditions.
C. Refer to chapter 6 for instructions on how to park in bad weather conditions.
A. Turbine press air is in the aft right body fairing.
B. The ram air turbine is located in the aft right body fairing.
C. The air pressed by turbine is located in aft right body fairing.
A. 功能测试应该包含进行性能测试所必要的所有信息,以保持系统或组件的可靠性在可接受的水平,而不用参考其他文件。
B. 功能测试包括所有必须的信息,无需参照附加文件,就可以执行为了保证系统及部件的可靠性而做的能力测试。
C. 不用参照其它材料,功能测试为了确保系统或组件的可靠性是可接受的而提供了所有必须的信息。
A. Finish stage 1 to 4 to ensure that no axial force is derived from the rod.
B. Do steps 1 thru 4 to make sure that no axial load is applied on the rod.
C. Procedures 1 to 4 are designed to check if the rod exerts axial force.
A. The valve allows the hydraulic pressure to pass through in this configuration.
B. The hydraulic pressure is blocked by the valve in this setup.
C. In this configuration, the hydraulic pressure bypasses the valve.
A. Gives the symbols for resistors, diodes, and other parts of the system.
B. Gives the symbols for relays, resistors, and other parts of the system.
C. Gives the symbols for relays, diodes, and other parts of the system.
A. 在升降飞机时,要确保操作升降设备的人员接受过恰当的培训并具备相应的知识。
B. 在对飞机进行平衡、顶升或放下时,确保人员接受过升降设备的培训并掌握相关技能。
C. 当水平放置飞机或顶升飞机时,确保操作升降设备的人员学过培训知识。
A. The lower seal is invisible prior to switching the lower bearing on.
B. The lower seal becomes visible when you push the lower bearing up.
C. The lower seal comes into view when you pull the lower bearing down.