A、 The drain float valves in the vent tubes and the vent channels dilute the fuel in the vent system to drain out of the tank when the fuel face is lower than the valve.
B、 The drain float valves in the vent tubes and the vent channels permit fuel in the vent system to drain into the tank when the fuel level is lower than the valve.
C、 The drain float valves in the vent tubes and from the vent channels allow the fuel in the vent system to drain into the tank when the fuel quantity is lower than the valve.
答案:B
A、 The drain float valves in the vent tubes and the vent channels dilute the fuel in the vent system to drain out of the tank when the fuel face is lower than the valve.
B、 The drain float valves in the vent tubes and the vent channels permit fuel in the vent system to drain into the tank when the fuel level is lower than the valve.
C、 The drain float valves in the vent tubes and from the vent channels allow the fuel in the vent system to drain into the tank when the fuel quantity is lower than the valve.
答案:B
A. This system does not include the usual channels of communication available to CAP.
B. This system does not supersede the normal channels of communication for items not covered by the CAP.
C. The usual channels of communication in this system cannot be replaced by the introduction of CAP.
A. Add 5 ml of hardener to the compound.
B. Add 5 ml of adhesive to the compound.
C. Put 5 ml of hardener to the component.
A. You can use the past form of technical verbs as adjectives.
B. You can use the past tense form of technical verbs as adverbs.
C. You can use the past participle of technical verbs as adjectives.
A. The counted time resets to 0 when the button is kept down for two seconds.
B. The total time resets to 0 when the button is held on for two seconds.
C. The remained time resets to 0 when the button is seen down for two seconds.
A. 从空气循环机出来的冷却空气与其没被冷却时比不再能承载那么多的水。水分离器被用来把水从饱和的空气中除掉,然后空气再进入座舱。来自于空气循环机的水雾装的空气在水分离器中凝结成大水滴。水在水分离器中越来越多然后排出空气循环机,而干燥的空气继续向后流。
B. 从空气循环机出来的冷却空气与其没被冷却时比不再能承载那么多的水。水分离器被用来把水从饱和的空气中除掉,然后空气再进入座舱。来自于空气循环机的水雾装的空气在水分离器中凝结成大水滴。水在水分离器中越来越多然后排出水分离器机,而干燥的空气继续向后流。
C. 从空气循环机出来的冷却空气与其没被冷却时比不再能承载那么多的水。水分离器被用来把水从湿润的空气中除掉,然后空气再进入座舱。来自于空气循环机的水雾装的空气在水分离器中凝结成大水滴。水在水分离器中越来越多然后排出空气循环机,而干燥的空气继续向后流。
A. 系统的这个部分用来显示数量、温度和液压油的压力,包括的项目有传输机、指示器和告警系统等。
B. 用来显示液压油的质量,温度和压力的系统部分,包括转换器、指示器和告警系统等元件。
C. 系统中用来指示液压油的油量、温度和压力的部分,包括传感器、指示器和告警系统等组件。
A. 结构类别分为三类:主要的、次要的、备用的。
B. 结构类别分为三类:主要的、次要的、必需的。
C. 结构类别分为三类:主要的、次要的、第三位的。
A. 在地面上的停放点贴上胶带。
B. 在地面上通过系留点贴上警示带。
C. 将绳索通过系留点连接到地面。
A. 表中给出了尺寸。
B. 表在桌子上。
C. 尺寸在图中显示。
A. 不要组装或修理点火嘴。
B. 不要拆解或修理点火嘴。
C. 不要组装或更换点火嘴。