A、 Make sure that the tab fully connects to the surface without bubbles.
B、 Make sure that the label fully attaches to the surface and that there are no bubbles.
C、 Make sure that the tag is fully engaged on the surface and no bubbles.
答案：B
A、 Make sure that the tab fully connects to the surface without bubbles.
B、 Make sure that the label fully attaches to the surface and that there are no bubbles.
C、 Make sure that the tag is fully engaged on the surface and no bubbles.
答案：B
A. Give precise instructions for using emergency exits.
B. Give special directions for using urgent exits.
C. Give accurate data for using urgent exits.
A. As necessary, use the applicable SAFETY BARRIERS, classified by the operator＇s instructions and your local regulations. These communications are subjected to atmospheric interference and difficult to understand.
B. Use the applicable SAFETY BARRIERS, specified by the operator＇s instructions and your local regulations if necessary. These communications are affected by the atmosphere and difficult to understand.
C. Use the applicable SAFETY BARRIERS, classified by the operator＇s instructions and your local regulations if necessary. These communications are subjected to atmospheric interference and difficult to understand.
A. Do the tightening procedure.
B. Do the loosening procedure.
C. Do the strengthening procedure.
A. AD describes corrective action, e.g. inspection, repair or maintenance, which may be listed by AD or included in another document, e.g. manufacturer＇s Service Bulletin that acts as reference in the AD.
B. The corrective action prescribed by the AD, such as an inspection, repair, or modification, may be detailed in the AD itself or may be contained in another document, such as manufacturer＇s Service Bulletin, which is referenced in the AD.
C. AD details the requirements for inspection, repair or modification described in corrective action, or it may be contained in another document, such as Service Bulletin referenced in AD.
A. The function of this special tool is to remove the shims.
B. The purpose of this special tool is to extract the bushing.
C. The function of this special tool is to extend the washer.
A. 确保皮托管温度增加至500摄氏度以上。
B. 确保机外环境温度增加500摄氏度。
C. 确保探头温度增加至500摄氏度以上。
A. 拆卸组件之前，先将系统泄压。
B. 在断开导线之前，给系统放气体。
C. 在断开部件之前，请确保完全停止供气。
A. 发动机分析仪的功能是通过示波器等仪表或设备分析发动机性能或状态。
B. 发动机分析系统使用传感器等仪器或设备采集数据并应用于发动机性能或状态分析。
C. 发动机分析系统被用于分析发动机性能或状态，以供示波器等仪表或设备使用。
A. 通风系统使飞机产生不同的压力从而将废气排出。
B. 飞机利用通风系统将空气排出机外。
C. 通风系统利用压差将空气排出飞机。
A. When the indicator is visible, stop the pump.
B. When the indicator comes on , stop the pump.
C. Stop the pump unless the indicator comes into view.
