A、 You have the right to duplicate or publish this document or any substituent alteration or revision thereof, in whole or in part, free of charge.
B、 You have the right to reproduce or publish this document or any subsequent modification or revision thereof, in whole or in part, free of charge.
C、 You have the right to recopy or publish this document or any substantial alternation or revision thereof, in whole or in part, free of charge.
答案:B
A、 You have the right to duplicate or publish this document or any substituent alteration or revision thereof, in whole or in part, free of charge.
B、 You have the right to reproduce or publish this document or any subsequent modification or revision thereof, in whole or in part, free of charge.
C、 You have the right to recopy or publish this document or any substantial alternation or revision thereof, in whole or in part, free of charge.
答案:B
A. Repair the broken seals.
B. Repair the damaged sealant.
C. Repair the damaging sealant.
A. 拆除部件之前,给系统充气。
B. 安装部件之前,给系统释压。
C. 断开部件之前,给系统放气。
A. 反推装置是系统中引导废气产生推力的部分。
B. 反推装置是系统中改变排气方向用以向后推力的部分。
C. 反推装置能够改变排气方向进而产生反推力。
A. 这一系统部分包括控制手柄、钢索、作动筒、告警系统、连接装置、操纵面、位置指示器等部件。
B. 这一系统部分包括控制手柄、电线、作动筒、告警系统、连接装置、操纵面、位置指示器等部件。
C. 这一系统部分包括控制杆、电缆、作动筒、告警系统、连动装置、操纵面、位置指示灯等部件。
A. 如果重量或力臂的差异不重要,则整体装置的所有部件可组合成一个设备清单项。
B. 当构成某组件的各零件的重量或相对于重心的力臂并不显著时,可在清单中将所有零件作为一个设备项列出。
C. 如果重量或力臂的变化不显著,则所有安装的部件可组合成一个设备清单项。
A. 控制部分控制螺旋桨叶片俯仰,但不包括任何与螺旋桨组件一起旋转的部件。
B. 控制部分能够控制螺旋桨桨叶的桨距,但不包括任何与螺旋桨组件一起旋转的部件。
C. 控制部分控制螺旋桨叶角度,包括任何与螺旋桨组件一起旋转的部件。
A. 在释压测试期间,不得开启舱门。
B. 在增压测试期间,确保舱门关闭。
C. 进行水压测试时,确保舱门关闭。
A. It is not permit to work with any uncontrolled technical document for maintenance work.
B. It is not permitted to work with any uncontrolled technical document for maintenance work.
C. It is not allowed to work with any unreliable technical document for maintenance work.
A. Adjust the lever intentionally and reset the system to the neutral position.
B. Move the lever before setting the system to the neutral position again.
C. In case of an inadvertent lever movement, return the system to the neutral position again.
A. Do a hardness test for turning tool.
B. Conduct a hardness test for the carbide insert.
C. Take a hardness test for the chuck.